Comprehensive Review: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2-1/2" Hitch Video

Hey Austin, so the trick to picking out a weight distribution system is to go with one that has a tongue weight range that matches the tongue weight of the trailer. So in your case you'd need a system that has a tongue weight range of right at…

The Equal-i-zer Weight Distribution System part #EQ37100ET and Blue Ox SwayPro Weight Distribution System part #BXW1000 are both great options. However, in regards to combating trailer sway the edge has to go to the Equal-i-zer because it has true…

This is a pretty common issue with aluminum frames so we definitely have a options available for you. With that being said, the 8 inch frame height will make things a bit more difficult, but not impossible. First, the Curt TruTrack Weight…

Since you already have the Blue Ox SwayPro Weight Distribution w/ Sway Control item #BXW1000 I would not recommend buying a new one to go with your Grand Design Imagine 2970rl. The tongue weight range on that Blue Ox is 750-1,000 lbs so you're…

No, it does not but there are a couple of options to make them work with a 2-1/2" receiver. The Blue Ox SwayPro Weight Distribution item #BXW1006 and item #BXW1000 are only sold with 2" shanks. The least expensive option is to use the Curt…

The standard spring bar length for Curt trunnion bar weight distribution systems is 30-5/8 inches. Anything that has 28-3/8 inch long bars is a short bar system even if it does not explicitly state it. What you might be able to do is use chain…

The difference between the two systems is basically the attachment point. One is not better than the other except that the trunnion bars are a little easier to install than the round bars that require a clip to hold them into the head. For the round…

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

The B&W Continuum Weight Distribution System #BW28FR currently just comes with the 1 shank and it offers a 3-1/2" drop according to my contact at B&W. Currently they don't offer a shank with a larger drop but it may be something they…

For a trailer that weighs 10,000 lbs when fully loaded, you'll need a higher-rated weight distribution hitch, and the best one for that is from Blue Ox, called the SwayPro. The correctly rated SwayPro that also fits a 2-1/2 inch hitch receiver is…

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

Any time the weight of the trailer exceeds 50 percent of the weight of the tow vehicle a weight distribution system is recommended. When using a weight distribution system with your 2003 Ford Excursion you would have the towing capacities of 12,500…