Hey Dane! I went down to our warehouse to measure the airbags from Air Lift 1000 Heavy Duty Air Helper Springs for Coil Springs #AL60828HD and they came out to 12" tall (12-1/2" including Schrader valve) and 5" wide while uninflated.…
Hey Cynthia, thanks for the information! Your Dexter 6,000 lbs axle typically uses a 25-1/4" long 5-Leaf Double-Eye Springs like the item #e34SR you were looking at. I see your RV is a 2021 Grand Design Reflection. What specific model is your…
Hey Garret, thanks for the information. I've got a couple of options to upgrade your 3,500 lbs axle. One's a standard axle the other includes brakes and braking hubs. They both have a 5,200 lbs capacity, a 95" hub face, and 80"…
Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.
I don't have any way to look up parts for a specific trailer, if you can send photos I'd be glad to see if we have any options for replacement. That said, it looks like some use them use a fairly standard rectangular taillight for trailers…
Hello Gilbert, thanks for reaching out. We do have brakes and hubs for Dexter 4,400 lb axles, but the sizing for these 4.4K axles can be funky depending when they were made. The best way to confirm what you need is with the casting number on the…
Hey Vincent! The only way to make sure this fits is to identify your axle capacity and then measure your leaf springs. If you have 3,500 lb axles (should be listed on your axle tags) this is the right capacity. If your current leaf springs measure…
I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…
The equalizers that come with the Dexter Heavy-Duty Suspension Kit #K71-448-00 have bolt holes that measure 6" apart on center and then 4" tall on center as you can see in the attached photo. You'll want to measure your current…
Hey, Lance. The direction the springs are in doesn't matter. They can be to the front or to the rear of the axle and will perform the same either way. What kind of trailer are you working on?
Unfortunately we do not have any hubs that use those bearing numbers. Your options would be to remove your old spindle and install a new spindle such as #TRU24FR with compatible hub and drum such as #84546UC3. You could also replace your entire axle…
Filters
