Result: KEEL ROLLER

Hi Billy, The F500277 is for a Fulton trailer jack that is no longer in production. The 4 3/8" x 3 3/8" bracket measurements are typically from an older style weld on trailer jack, we used to have a version that fit those dimensions, but it…

Hi Mike, that’s a great question and I totally get why you’d want something that lines up with your existing holes and bolts right on without any guesswork. The honest answer is that the Fulton F2 uses a unique mounting pattern, so there really isn’t…

Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…

I went out into the warehouse to measure the Lift Kit #K71-725-02 for you. The holes measure 9 inches on center and 9-1/2 inches on center. I've attached a photo to assist.

Hi Kevin; all of the roller bunks like the Tie Down Roller Bunks for Boat Trailers #TD74FR are in 5' long sections. If you want to use these, you will have to modify the trailer so they fit. The only other solution would be to use bunk boards…

Hey Mark, thanks for the information. The highest capacity roller bunks we have are the 1,500 lbs Tie Down Roller Bunks for Boat Trailers item #TD74FR. The Tie Down Roller Bunks for Boat Trailers item #TD87FR you were looking at, also top out at…

Hey Ted! Thanks for catching that. The Terran Industries 4-Leaf Double Eye Spring #TX58RJ has a capacity of 1,750 lbs per spring. These are designed to work with 3,500 lb axles. If you have a 3,500 lb axle with 25-1/4" leaf springs these will…

The yellow and blue rollers are considered "non-marking" rollers so they are the ones I recommend most. Black ones have a tendency to leave marks on boats so usually don't recommend them. I attached a page that has all of the…

We don't carry the Calkin brand but we do have rollers. What type of roller are you looking for and what dimensions?

We do have similar replacement keel rollers to what you currently have, such as the Yates #YR800B, however we don't have any double roller brackets like your existing Calkins model. Since they are no longer in business your only option is likely…

Thanks for the photo. It does indeed look like you need to move your keel rollers up towards the bottom of the boat until they are touching but not supporting the full weight. Therefore, marking the bracket when the rollers are flush to the bottom…

In order to choose the correct replacement keel roller for a boat trailer you'll need to know both the length and shaft diameter. We do not have any options that are 9" long but we do have 8" part #YR8000 (5/8" Shaft) and 10"…