Availability of 6' Long Roller Bunks

Question

Question:

Do you make a 6’ bunk roller set? I have a used home made boat trailer and the cross bars are welded in place and 6’ apart.

asked by: Kevin R

0

Expert Reply:

Hi Kevin; all of the roller bunks like the Tie Down Roller Bunks for Boat Trailers # TD74FR are in 5' long sections. If you want to use these, you will have to modify the trailer so they fit. The only other solution would be to use bunk boards like the 6' # CE27840 or 7' # CE27845.

What kind of boat do you have?

expert reply by: Robin H

0

Tie Down Roller Bunks
(click to enlarge)

Answer 1

I'll start off by saying that I've seen quite a few boat trailers that use a combination of rollers like the CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair #CE27710 and a carpeted bunk like the CE…

view full answer...

Answer 2

Hey Lisa. The Tie Down Bunk Slicks item #TD39FR do not require carpet. You can attach them to the treated lumber directly. The Tie Down Bunk Slicks item #TD39FR come in a 8-pack and measure 17" long 1-3/4" wide. They're made of PVC and…

view full answer...

Answer 3

Hey Tom, welcome back! The Tie Down Bunk Slicks for Boat Trailer Bunks item #TD59FR do not have any weight limitations. These come in a pack of 10 and measure 16" long and 3" wide. They do not come in white but I have a set that does. For a…

view full answer...

Answer 4

The longest section of roller bunks we offer is 5 feet like the part #DL21741 that you referenced. For a 10 foot long section you would want to use one 5 foot section like the #DL21741 and then a set of 4 feet long roller bunks like the part…

view full answer...

Answer 5

I spoke with my contact at CE Smith and she stated that 5 foot roller bunks will be adequate for your 15-1/2 foot Smokercraft Alaskan, as long as the space between the cross members are 56 inches or less. If the space is more than that, the 5 foot…

view full answer...

Answer 6

Bunk rollers like the #DL21754 you mentioned would be an excellent choice for PWC's that rest on the edges of the bunks, as most of them do. At 4 foot long, they'd probably offer plenty of support, but I'd recommend getting a set…

view full answer...

Answer 7

The covers of the Fulton XLT part #F142425 are removable with a Torx head wrench. If you are looking for basically the nicest hand winch around this would be the winner. Our customers who have this winch all really like it so I know you will like it…

view full answer...

Answer 8

Hey Jon, the rollers on the Dutton Lainson Boat Trailer Roller Bunks part #DL21741 that you referenced are non-marking and would not leave marks on your jet ski.

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Availability of 6' Long Roller Bunks

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching