Hey Brent! I'm not sure you will hear back from Dexter on that, A245875 doesn't look like one of their serial numbers. None of that other information can be used to verify which hubs will fit either. However, based on the weight of the boat,…
Hi Chris; I believe the LP85 was integrated into the tongue of the trailer. Unfortunately, that means it won't be an easy swap to replace it since other actuators won't fit inside the trailer tongue and line up with the holes from your old…
You have to have a breakaway battery kit like the Curt #C52028 for the breakaway brake function on your trailer. This is one of the things that the highway patrol will actually check for to make sure that you are pulling your trailer safely. The…
Hello Jake, Great question. I have a better option for you instead of wiring 2 of the Atlas IV Vaquero Self-Contained Hydraulic Trailer Jack - Bolt On - 10K #ST45FR, instead you can get the Atlas IV Vaquero Self-Contained Hydraulic Tandem Trailer…
The "20327-02" light base is a rectangular shaped clearance light measuring 4" long x 2" wide which was made by Optronics. The light has since been discontinued along with the replacement lens but we have had customers use part…
The term PC-Rated in reference to trailer lighting means Photometrically Certified. What this means in actual practice is that a light fixture is viewable from a 90-degree angle. Other non-PC-rated lights are considered to be viewable from a 45…
Hi Dean; I'm only seeing the BulletProof Hitches 5/16" Safety Chains #BPH94MR which is a pair rated for 18,800 lbs. The individual chain rating is 9,400 lbs. What brand was the single safety chain? I don't see it as part of anything you…
Actually all you really have to do is remove the oil from the hub and then pack the hubs with grease and then get the correct bearing buddy to match the threaded hub bore. You will need to measure the inner diameter of where the old grease cap…
Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…
Hey Joe, thanks for all of the details you mentioned. The Bulletproof Hitches Safety Chains part #BPH94MR that you referenced would be exactly what you are looking for. These are 38 inches long and are 5/16 inch in diameter as well. For a set of…
Hey Amy, it looks like your Norcold N410 measures about 36-9/16 inches in height, 23-11/16 inches in width, and 24 inches in depth (4.5 cu ft of storage). The new Everchill RV Mini Fridge - Left Handed Door - 4.5 cu ft - 12V #EV96RR measures…
Filters
