Hi Dan! You are correct. The part number has changed, but we got you! The TruRyde Grease Seals 10-36 (pair) #RG06-070 you found are the correct replacement. I'm not 100% sure why they changed/did away with the part number, but you do have a 10-36…
Yes, Tekonsha released the part #3062-P which is a brake controller install harness that fits your 2019 Subaru Ascent and would work well. I attached a picture that shows where you'll find it on your vehicle too. For a brake controller I would…
I linked the schematic diagram for Lead Jack Repair Kit #LG-146059 taken from the written instructions. The complete instructions will be sent to you in a separate link. The follow leg repair kit is part #LC146060 in case you need it.
If your 2008 Toyota Tundra has the factory 7-way connector in the back, then you should be able to plug in a brake controller adapter under the dash of the Tundra. Does the connector provided by the manufacturer look like the Universal Brake Control…
The Andersen Ultimate Fifth Wheel Connection Adapter part #AM3200 that you referenced has 9 inches of offset built into it. What that means is that ball that connects to the trailer's pin box is moved back 9 inches from the center line between…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hey Dale. I really like the Ark Xtreme Off-Road Jack w/ 2 Wheels item #ARK99FR you were looking at. It's got treaded rubber wheels instead of formed plastic so it cuts through mud and gravel pretty easily. It bolts to trailer frames 2" to…
We do have trailer coupler locks you can use, but if your coupler doesn't have a pin hole, there isn't a way to lock it while it's attached to your vehicle's hitch ball; it will need to be uncoupled for a lock to be put on. Once you…
Hi Robert, So there isn't one that can be used with a cordless drill (which would be an electric jack only) as all the electric A-frame jacks are all higher than the 12" to 14" you want. There is a manual crank jack you can use which I…
If you have a 2008 GMC Yukon XL Denali (or even a regular Yukon Denali) then you can follow the video I have linked for the 2011 Suburban. The installation process will be identical. I have also included a link to our how-to article that explains…
Filters
