Search: pintle hitch   >  

Hello Jared, thanks for reaching out. The best front hitch option for your 2024 Ford F350 DRW is the EcoHitch #EH54QR. This hitch is made specifically for dually models, and it has the higher receiver placement that you are looking for. It is a…

The centerline on the #BR27FR is going to be from the center of the hitch pin hole. If you draw a line straight out and measure the distance to the bottom of the hook that is 1". I have attached a diagram below for your reference.

Hey John, Hellwig is a bit new to our selection so I haven't gotten to get my hands on as many of their products as compared to Roadmaster. The experience I've had so far has been somewhat disappointing in terms of overall quality…

Hey Michael, I can help you get setup to tow with your 2024 Toyota Tundra. First you'll need a receiver; I recommend the etrailer Trailer Hitch Receiver 2" #e98905 since it has a matte finish which blends in and looks OEM. Then you…

The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs #DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of…

The Roadmaster Front Anti-Sway Bar #RM-1139-176 isn't a fit for your 2018 Ford F-350 but Roadmaster does have a rear anti-sway bar that is confirmed to fit with part #RM-1139-173. If your factory bar is missing or the end links are in need of…

I attached a picture that has all of the mounting hole dimensions for the Buyers Products 10 Ton Combination Hitch with Mounting Kit #33710057 for you to check out. The distance between the two vertical mounting holes is 1-3/4 inches and the distance…

Yes, the Sleeve-Lock Trailer Coupler #CTA-196 will fit the channel bracket that comes with the Brophy Lunette Ring w/ 3-Position Adjustable Channel Bracket #BR43ZR. The bolt holes match as well when it comes to size and spacing so you'll be good…

The Buyers Products 50 Ton Air Compensated Pintle Hook part #337PH50 measures 2.38" deep by 3" wide. The inner eye diameter is 1.60" wide and 1.37" tall. I contacted Buyers and this hook uses a standard Lunette ring.

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2…

The Plug-In Wiring Harness #3064-P that you referenced is the correct brake controller harness for your 2019 Chevy Silverado 1500 and it is actually a brand new product for this generation of GM trucks (it currently only fits the 2019 model Silverado…

The bolt holes from left to right on the Buyers Products Pintle Hitch Plate Mount part #337PH50 are separated by 5 inches and from the top to middle the distance is 2-3/8 inch and then from middle to bottom is 2-1/8 inch.