Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Michael. The Curt Helux item #C94HB is about 6" shorter and 20 lbs lighter than the Reese Goose Box item #RP85FR that also fits a Rhino Box pin box. The Curt Helux item #C94HB weighs 200 lbs, including the safety chains. It measures…
view full answer...Yes the Equal-i-zer weight distribution shank part #EQ90-02-4900 is essentially the exact same shank as the 90-02-4325 you mentioned with exact same dimensions and capacities.
view full answer...I was able to determine that your trailer has torsion axles but not the brand or capacity. We know that Lance likes to use Dexter axles so I would be shocked if it wasn't a Dexter Torflex which the lift kit part #K71-707-02 you referenced would…
view full answer...We do have covers available for the prep package on your 2021 Chevrolet Silverado 2500. For the gooseneck hole we have the Rubber Hole Cover for Reese Elite Series Under-Bed Gooseneck Trailer Hitch #RP30136. For the pucks we have the Replacement Puck…
view full answer...You can start the pairing process for the #TK94FR with the trailer disconnected, but it will need to be connected to finish the pairing. This is the procedure you need to follow to complete the pairing. Connect the RF unit to the tow vehicle, but do…
view full answer...Just the remote of the Prodigy RF part #TK94FR is what pairs to the rest of the controller. No part of the setup actually pairs to any vehicle so you can easily transfer the setup to a new vehicle and not have to worry about re-pairing it. A lot of…
view full answer...The Prodigy RF #TK94FR is a great wireless brake controller but if the pairing instructions are not followed exactly, the unit will not pair as you are experiencing. The biggest mistake folks typically make is to begin the process with the trailer…
view full answer...There are several possible causes that can lead to the nc error on the Prodigy RF, #TK94FR. First, make sure that the power module is connected to the tow vehicle and not loose. You can also check for dirt and corrosion in the trailer side connector,…
view full answer...If you have double-eye leaf springs in the underslung position, you can use an over-under conversion kit like #K71-384-00 (for 2-3/8" axles) or #K71-385-00 (for 3" axles). Simply measure the diameter of your axle to determine the correct…
view full answer...Some weight distribution system prohibit reversing because doing so could damage the system. If you are backing up in a straight line though it would be fine. But to make turns while backing up you would need to disengage the spring bars and/or the…
view full answer...A #9 Torflex axle is rated for 1,000 - 2,200 lbs so since your Lance 1575 weighs well over 2,200 lbs dry I'm confident you have a #10 Torflex axle (which can be rated for 2,300 - 4,000 lbs). With that in mind, since you have a single axle trailer…
view full answer...Yes, the Antenna Extension for Voyager Digital Wireless System #WVOSAPANTEXT that you referenced does work with the Voyager Wisight 2.0 kit that you have.
view full answer...Related Searches