Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this…
view full answer...The K-Source Snap & Zap Custom Towing Mirrors #KS80930 I feel are the best mirrors extensions for your 2024 GMC Sierra 1500. These have all the cut outs for turn signals, puddle lights and cameras you may have on your mirrors. The snap on…
view full answer...I went out to the warehouse and pulled wheel lock set #RG01-150. The overall internal depth of the nuts that thread onto the wheel studs is 1-1/4 inches including the threaded part. The threads make up 3/4 of an inch of that 1-1/4 inch overall…
view full answer...Trailer tires and wheels are not balanced before shipment as the weights could potentially fall off during shipment. Also, trailer tires and wheels, especially of this small size, do not typically need to be balanced and most tire shops…
view full answer...For the tire size ST225/75-15 in the Load Range D like the part #274-000029 the weight capacity is 2,540 lbs at 65 psi. Which with just four of these you'd be over the 10k GVWR of the trailer you mentioned so you should be fine.
view full answer...We usually tell people to look for about 3 inches of clearance to account for the total travel capabilities of trailer suspension. If you have less than 3 inches you might be able to compensate by using slightly longer shackle straps. I have included…
view full answer...The section width of the Kenda 205/65-10 Bias Trailer Tire, part #AM3H340 is 8.3 inches so the mounting surface of the wheel to the outer edge of the tire on the sides is about 4.2-inches. The wheel has a zero offset. You will also need to make sure…
view full answer...The Wheel Lock Set for 1/2" Wheel Bolts (2 Locks, 1 Key) #RG01-150 are the traditional 1/2-20. The actual depth of the locking nut is 1-1/4 inches.
view full answer...Your 2021 Audi Q7 is going to have a smart wiring system. For the Curt Echo #C51180 to function properly and receive power you will need to connect your trailer 7-way to the Echo once you plug into the connector on your Audi. The computer in your…
view full answer...I spoke with my contact at Kodiak about the Kodiak Disc Brake Kit, part #K2R35DS, and found out what is included and what you would need to supply. Basically, all you will need to supply is the bolts that the bracket to the axle. Other than that…
view full answer...When it comes to a 205/75R14 trailer tire like the Kenda, #AM10234, this size of tire will fit a 5", 5-1/2", 6", or 6-1/2" rim. I spoke with our in-house tire expert and he said that when it comes to choosing a rim for a trailer…
view full answer...To get the best braking power for your boat trailer you would want to have disc brakes on both axles. If you happen to be limited to one axle then you would want the rear outfitted. With a 5,000lb boat you likely have two 3,500lb torsion axles. The…
view full answer...Filter Your Search
Contact and Help