Parts Needed to Flat Tow a 2003 Subaru Forester

Updated 08/15/2014 | Published 08/14/2014

Products Featured in This Question

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

(2137)

$575.00

Roadmaster Bulb and Socket Tail Light Wiring Kit for Towed Vehicles - Incandescent

(439)

$83.63

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(407)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(660)

$69.90

Roadmaster Even Brake Portable Flat Tow Brake System - Proportional

(56)

$1930.00

Question:

My 2003 Subaru Forester already has Roadmaster base plates installed, I have attachment plates and tow bar from another vehicle. the pins on the attachment plates are center to center 24inch on my old tow bar they need to be 30inch what is best solution?

asked by: Jeffery R

Expert Reply:

Sounds like your tow bar is not a Roadmaster tow bar and you are in need of an adapter to go from your base plate kit # 913-1 to your tow bar. Which if this is the case check out the FAQ article I attached to the right.

If your tow bar isn't listed there you will need to upgrade to a new tow bar.

The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

For lighting you can use the bulb and socket kit, # RM-155, and not have to worry about cutting and splicing into the vehicle wiring.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Even Brake proportional system, # RM-9400, that applies the vehicle brakes in proportion to how much the two vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.