Looking For Replacement Vent Lift Motor For Fantastic Model 6000A With K6050-80

Question

Question:

I am looking for a replacement vent lift motor for a Fan-tastic fan model 6000A. From parts lists, it appears to be part number K6050-80 or -81. I only see K6010 on your web site. Can you confirm the 6010 would replace the 6050?

asked by: Glenn A

0

Expert Reply:

Hey Glenn!

You are spot on! The Replacement 17-rpm Lift Motor for Dometic FanTastic B Series Roof Vents w/Powered Lifts - Off White # FVK6010-80 (also available in pure white # FVK6010-81) is the correct replacement lift motor for your fantastic fan 6050. Just keep in mind that on that model, you'll actually need to reverse the wires when installing! So instead of red to red and black to black, flip them so it's red to black, black to red etc.

Let me know how it goes! What kind of RV is this going in?

expert reply by: Andrew N

0

Glenn A.

6/4/2026

It is an Airstream

Andrew N.

6/4/2026

@GlennA Oh very nice, well good luck and let me know if you need any help. Sorry it took awhile to get that response over to you as we were a bit behind this week :(.

Answer 1

I reached out to my contact at Fantastic Vent and confirmed that if your motor/switch only work to close the vent, but don't work to open the vent, it's definitely a sign of a faulty motor. To replace the motor on your Fantastic Vent with…

view full answer...

Answer 2

We have the Replacement Lift Motor for Fan-Tastic Vent B Series, #FVK6010-81 in white and the same motor in an off-white under part number #FVK6010-80. These operate at 17 RPM's. However, the color alone will not identify which replacement is…

view full answer...

Answer 3

For your Fantastic Vent Model 6000A/6000BTA the Replacement Fan Motor Assembly Kit #FVK8017-00 that you referenced is the correct replacement.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Joseph, thanks for reaching out. The difference between the yellow and black SumoSprings is the weight capacity or stiffness of the spring. For the 2018 Ram ProMaster 1500, the black ones part #SSR-307-47 are 1,500 lb capacity. Those are good for…

view full answer...

Answer 9

Hey Brandon, thanks for reaching out! The brake controller plug for your 2025 Ram 1500 is under the dash to the right of your steering column, according to the installation instructions for the Curt TriFlex NEXT Trailer Brake Controller w/ Custom…

view full answer...

Answer 10

Hey Vincent welcome back! I totally get the not wanting to call in. I can't hear out of one ear so I get it. The Roadmaster Sterling Tow Bar Adapter Brackets for Demco Base Plates item #DM9523062 are indeed the correct adapters. The item…

view full answer...

Answer 11

Welcome back, Randy! The Demco Tabless Base Plate Kit - Removable Arms #DM9519341 will be the easiest to install out of all the base plates we currently have for your 2025 Ram 1500. It does require the least amount of modifications as well, so it…

view full answer...

Answer 12

Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…

view full answer...

Looking For Replacement Vent Lift Motor For Fantastic Model 6000A With K6050-80

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching