Need Correct Bearing Kit for Dexter 2990 lb Axle On a 2009 Pace American Cargo Trailer
Updated 01/25/2010 | Published 01/22/2010
Products Featured in This Question
Question:
I have a 2009 Pace American cargo trailer, model JT58SA. The axle is a Dexter 2990 lb axle - see this link: http://www.paceamerican.com/trailers/journey/tag/#specInfo. I would like to order extra bearings, races, and seals for this axle without pulling out the existing parts to identify the part numbers the bearings do not need repacking yet. The axle has the EZ Lube feature and a 5 lug hub pattern. Is this enough information for you to identify the correct part numbers? Thanks for your help.
asked by: Steve S
Expert Reply:
Yes, I spoke to our local Pace trailer dealer and they were very helpful. Your trailer has a 3,500 pound Dexter axle under it that is de-rated to 2990 pounds because of the spring placement on the axle. This is the case most of the time for enclosed trailers.
I have listed the bearing, race and seal part numbers below for you.
Bearing Inner # L68149
Bearing Outer # L44649
Race Inner # L68111
Race Outer # L44610
Grease Seals # RG06-050
Product Page this Question was Asked From
Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: axel seals
- Search Results: trailer bearings races seals caps
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 1.98" Outer Diameter
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Search Results: trailer wiring
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Search Results: trailer hitch
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Search Results: trailer tires and wheels
- Search Results: trailer jack
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Gooseneck Hitch
- Search Results: trailer suspension parts
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Best Grease for Trailer Bearings
on Trailer Bearings Races Seals Caps
