Looking for Replacement Hub/Drums Brake Assemblies for Triple L Deck Trailer
Updated 09/10/2026 | Published 09/03/2026 >
Products Featured in This Question
Question:
hello I have a triple L deck trailer with 16 8 lug wheels the brake backing plate is stamped Dexter 6-7KPRI-GG SEC-GG 5.2KPRI-FF SEC-FF 12X2DXQ 36-89 Im looking to replace with self adjusting part 23-464-465 and drum part 42866UC3-EZ can you please advise if these will work thanks
asked by: daniel h
Expert Reply:
Hey Daniel, thanks for all of the info you listed on your trailer axle. Based on seeing all of that the correct parts are what you mentioned. The brake assembly set part # 23-464-465 is correct as well as the hub/drum part # 42866UC3-EZ. Did you have your brakes/hub fail or you just doing some preventative maintenance?
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Q&A: Correct Replacements for Dexter 023-359-00 Left Hand and 023-360-00 Right Hand Braking Assemblies
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Article: Trailer Wiring Diagrams
- Q&A: Dometic Soft Start for Dometic B59516.711C0-MX
- Q&A: Dexter Hub Replacement for Hub Part # K08-219-9B
- Q&A: How Do You Know When to Replace Shoes on Drum Trailer Brakes
- Q&A: How Can I Identify an Axle Without a Sticker?
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Most Popular Wheel Bearings
- Article: RV Propane Troubleshooting | Common Propane Issues and How to Solve Them
- Article: How to Measure a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern



Austin B.
9/10/2026
I installed the Dexter Nev-R-Adjust electric brakes on our 2013 Cedar Creek fifth wheel while replacing the wheel bearings. I purchased the brakes, bearings, and all the parts needed for the job from etrailer. The installation went smoothly, and everything fit as expected. Replacing the complete brake assemblies, since I already had everything apart for the bearings, made the job much easier and gave me confidence that the entire braking system was in good condition. The Nev-R-Adjust brakes have worked well and provide smooth, consistent braking. I also like not having to manually adjust the brakes as they wear. Overall, I’ve been very satisfied with the Dexter brakes and the parts I purchased from etrailer. I would definitely use this setup again on our Cedar Creek.