See what our Experts say about this Ultimate Jack Trailer Jack

• Replacement Jack for Welded On Jack Bracket with 4 3/8" x 3 3/8" Dimensions Center-to-Center
  Hi Billy, The F500277 is for a Fulton trailer jack that is no longer in production. The 4 3/8" x 3 3/8" bracket measurements are typically from an older style weld on trailer jack, we used to have a version that fit those dimensions, but it has since been discontinued. Our best course of action is to cut off the old bracket and weld on a new one for another trailer jack. Since your boat is roughly 2,000 to 2,175lbs depending on the model, your tongue weight is 10-15% of that. So, the...
  view full answer...
• Can I Replace My A-Frame Jack With a Side Mount Swivel Jack
  Hey, Pete! I think I’m on the right track here but, if I'm wrong about anything, let me know! Right now, you have an A-frame jack and you’re looking to replace it with a side-mount jack instead. Your trailer’s A-frame has a rail or beam running down the center of the open space between the “A.” I attached a photo of one of our A-frame jacks that looks similar to what you described. The jack you're looking at, part # PS1400400303 has an 11" bracket height, measured from the center of...
  view full answer...
• How Does The Ultimate Trailer Jack Fold Up For Travel
  Great question, Suzanne! The Ultimate Trailer Jack # UJ44FR is designed to simply adjust all the way up for storage using the spring-loaded lever when you're ready for travel. This gets the wheel completely off the ground and high enough to avoid any clearance issues. That lever I mentioned makes this maneuver super quick and easy, too. This is different than similar jacks that actually swing/fold up and out of the way, becoming parallel with the trailer frame. I attached a picture to...
  view full answer...
• How Does the Ultimate Trailer Jack Weld UJ44FR to the Frame?
  Hey Jon, welcome back. The adapter plate included with the Ultimate Trailer Jack item # UJ44FR can be welded directly to your trailer's frame. You can also use the included hardware and brackets to bolt it to your trailer's frame. The Ultimate Trailer Jack item # UJ44FR is a 1,500 lbs capacity jack with a 27-1/2" total lift. It is zinc plated for corrosion resistance and includes a 5-3/4" wheel. This would be a great replacement for your older Fulton Jack. What kind of trailer do you...
  view full answer...
• Bolt On Trailer Jack that is Best for Low Clearance Below Trailer Frame
  Hey Charles, the Ultimate Trailer Jack part # UJ44FR would be your best option. This allows you to set the mounting bracket height relative to the jack wheel which makes it really great for low clearance situations like what you have now.
  view full answer...
• Replacement Cap For Ultimate Trailer Jack
  Hi Kent, I completely understand wanting to get that cap replaced before anything works its way inside the jack and causes bigger issues. For your Ultimate Trailer Jack part # UJ44FR, there isn’t a direct replacement cap offered specifically for that model. That said, the outer tube on your jack is about 2-1/4 inches, and we do have a cap like part # TJA-2000S-CP that’s designed for that same outer tube size. It’s not listed as an exact match for your jack, so I can’t guarantee a perfect...
  view full answer...

Do you have a question about this Trailer Jack?