Recommended 5 Lug Hub for a Spindle w/ 141125 Inner and 09067 Outer Bearings
Updated 03/31/2026 | Published 03/26/2026
Products Featured in This Question
Question:
I need 2 trailer hubs and 2 5 lug 15 inch rims. To fit a particular spindle. The bearings that came off the trailer are as follows 141125 inner and 09067 outer. I believe thats 1.25in and 3/4 Inside diameter on the bearing races Thanks
asked by: Mark L
Expert Reply:
Hey Mark thanks for the information! To add a 5-lug hub, I recommend the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles item # DX22XR. This hub is sold individually and includes bearings, races, grease seal, grease cap, wheel bolts, and lug nuts. It works with 13" to 15" wheels.
Those are older bearing numbers but the item # DX22XR will indeed work with your spindle. Your 1.25" ID pn 141125 inner bearing corresponds to the item # LM67048 and your .3/4" ID pn 09067 outer bearing is the item # LM11949.
For a 15" wheel with a 5 on 4-1/2 lug nut pattern, I also recommend the Dexstar Steel Mini Mod Trailer Wheel item # AM20440. This black powder coated wheel is rust and corrosion resistant and has a 2,200 lbs capacity so it will definitely be perfect for your trailer.
That is definitely an older style spindle. What kind of trailer do you have and what size tires do you run on it?
You can add this information, along with any other questions you have, where it says Add Comment.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- LM67048 / LM11949
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: boat trailer hub assembly
- Search Results: trailer tires and wheels
- Search Results: boat trailer hubs
- Search Results: boat trailer wheels accessories and parts
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles
- Q&A: Trailer Idler Hub That Has a 5 on 4-1/2 Lug Pattern and Uses LM67048 and LM11949 Bearings
- Shop: Dexter Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Cast Iron
- Shop: Kenda Karrier KR35 ST175/80R13 LRC Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2
- Shop: Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2
- Q&A: Is 1.25" ID Bearing Too Large to Replace 1.19" ID Bearing?
- Shop: Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 4 on 4 - LR D
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Can the Agricultural Style 4 on 5 Inch Hubs Be Replaced with a More Common Bolt Pattern
- Q&A: Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
- Q&A: Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
- Q&A: Recommended Replacement For A Shoreland'r Trailer Hub Assembly SS733
- Video: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles Spec Review
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Fifth Wheel Towing Made Simple with Daniel
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Hubs and Drums
