Availability of Ground Clearance Measurement on Curt Hitch for 2025 Toyota Tacoma SR5
Updated 03/17/2026 | Published 03/05/2026
Products Featured in This Question
Question:
What is the distance from the center of the front receiver to the ground on a 24-25 Toyota Tacoma SR5?
asked by: Eric
Expert Reply:
Hey Eric! The ground clearance measurement for the # C55RJ is not something that Curt measures or provides as part of their specs. The only way for us to get this is if we have a chance to install it ourselves. This hitch wasn't available until recently, so we don't have an installation video yet with that measurement.
We do send out messages to other customers with the hitch on these answer pages, so if someone who already installed it is feeling kind they might jump in here and add that measurement in the comments. It is also worth mentioning that this is the only front hitch available for your Tacoma at this time.
What will you be using the hitch for?
(click to enlarge)
Keith S.
3/10/2026
Hi Eric, I have a 2025 SR5 and I also use the front hitch to attach a Meyer snow plow.. Works great.. Measurement from the ground to the center of the hitch is about 9.25"... I have a photo of a tape measure in front of the hitch if that would help, but there's no apparent easy way to attach it here.. Best of luck, -Keith
Robin H.
3/10/2026
Product Page this Question was Asked From
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended Front Hitch for a 2026 Toyota Tacoma
- Shop: Front Mount Hitch
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Vehicle Snow Plows
- Shop: SnowBear Snowplow for 2" Hitches - 82" Wide x 19" Tall
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: How to Choose a Trailer Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer wiring
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Q&A: Parts Needed to Install a Red Arc Brake Controller in a 2023 Toyota Tacoma
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Search Results: trailer jack
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Base Plate for Tow Bar
on Front Receiver Hitch
Jimmy
3/10/2026
I just measured 9-3/4" from the center of the hitch to the ground, however I have the 2025 Tacoma TRD off-road. I know that's not exactly what you are asking since I have a differnt model, but hopefully it will help. One other note, depending on what you are using the hitch for: I am using it for a Meyers HomePlow with a 4" drop/extender adapter to be able to connect. The weight on the homeplows is very significant, so you will see extra sag.