Can Tireminder i10 Monitoring System be Used on Longer Valve Stems of 2017 Jayco Greyhawk

Updated 02/20/2026 | Published 02/14/2026

Question:

can the sensors on my i10 monitoring system be used on the thru the wheel long metal stems that came on my 17 Jayco Greyhawk 29me

asked by: Dan H

Expert Reply:

Hey Dan, yes the sensors of the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster # TM89FR that you referenced will work with the longer valve stems you have on your 2017 Jayco Greyhawk 29ME. The sensors do not have a valve stem length requirement. Are the longer valve stems easier for you to access?

expert reply by: Jameson C

Tireminder i10 TPMS
(click to enlarge)

David A.

2/19/2026

I use them on my 5th wheel with long metal valve stems. Absolutely no problem. I am pretty sure the air pressure and temp in the stem are the same long stem or short. Hope this helps.

Jameson C.

2/19/2026

@DavidA thanks for the feedback!

Don K.

2/19/2026

Worked fine on my Grand Designs 295rl with metal valve stems.

John W.

2/20/2026

Should work just fine. I was very happy with the Tireminder. Install took one hour, mainly securing and wiring the signal booster. Much peace of mind with the unit monitoring the trailer tires. Especially helpful on a 3,500 mile trip from MN to PA and back two summers ago. I have since sold that trailer and bought a new one that came with a built in TST TPMS. I sent the Tireminder along with the old trailer. I have been in touch with the buyer and they really appreciate the Tireminder as well.

Daniel

2/20/2026

I have the system on my 2020 Grand Design Momentum. I just placed the sensors on my metal valve stems, Hooked up the signal booster and everything was simple. I programed the monitor and placed it on the windshield with the suction cup (provided in the kit). I checked the tires air pressure before installing the sensors and each year I replace the batteries and recheck the tire pressure. I have never had a problem and am very happy with this set-up.