Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace the old or damaged access door on your RV. This threaded design easily twists off to provide instant access to plumbing, electrical, hose, fuel, and cargo compartments. Its mounting holes match most RVs and waterproof seal keeps areas dry.
Features:
Specs:
How to Properly Measure for Cut-Out Dimension
There are two main dimensions you need to know when choosing a replacement access door or adding a new one to your RV:
The cut-out diameter is the width of the circle needed to ensure the access door mounts flush to the wall of your RV.
The mounting depth is the depth needed behind the mounting surface for the access door's hatch to properly fit.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the JR Products 5" access hatch for RVs. Now this will replace the 5" access hatch on your RV. Now the mounting hole pattern will usually match most original hatch rings. This will provide access to your plumbing, your electrical, your cargo areas and even your hose compartments.Once you unscrew the center lid, there, you can gain access. Does use a nice waterproof seal on here. It'll prevent leakage.
So in other words, when you put your lid back in there and tighten it down, that'll seal it. These are UV and impact resistant. You can see it's a nice black color.Few specs on this. The overall diameter, including the mounting flange, edge to edge, is going to be right at 6-11/16". The mounting hole dimensions, you can see there's six mounting holes, so if we measure from the center of one directly across to the center of the one right across from it, it's going to be right at 6-1/8".
The cutout diameter, which is this portion in the back here that would be cut out for this to be installed, the hole size would be 5-7/16". And then, of course, if we remove the center lid, the actual hatch opening diameter on the inside is right at 5".But that should do it for the review on the JR Products 5" access hatch for RVs.
Ratings & Reviews

Ron
5/4/2024
Ok,door would be better a little heavier guage, pretty flimsy

Ted
8/21/2022
Still working great

Robert
4/28/2026
The Raptor RV that I purchased used, didnt have excess to the dump valves. 3 of them. I had to crawl underneath to open and close the valves. I ordered 3 excess doors to solve this problem. Im 80 years old and cant get down and back up very easily. The doors that I ordered saved me from rolling around on the ground like a dieing fish. Very happy with this product.


Jenny N.
3/1/2022
I will have our customer service team reach out to you.
Do you have a question about this RV Access Door?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Mike L.
9/16/2022
We do mention above in the product description that the installation hardware is not included. This is because the hardware needed will depend on the nature of the surface that the access door is mounted to. Different surfaces require different hardware.