bing tracking image
Q & A Icon

Front And Rear Anit-Sway Bars For 2025 Fleetwood Bounder/Ford F-53  

Updated 02/11/2026 | Published 01/22/2026

Question:

I want to oder anti sway bars front and back for our 2025 Fleetwood Bounder. How do I make sure to oder right product for this installation Thanks

0

Expert Reply:

Hey Rick, thanks for reaching out. I can help with that. Your 2025 Fleetwood Bounder is on a Ford F-53 chassis, and we have both front and rear sway bars for that. Here are the exact parts numbers:

- Roadmaster Front Anti-Sway Bar - 2-1/8" Diameter # RM72MR

- Roadmaster Rear Anti-Sway Bar - 1-3/4" Diameter # RM25VR

Both of these will fit models with GVWRs between 16K and 26K. Both are no drill install. For the rear bar, it installs using the factory U-bolts and, in some cases, they aren't long enough. They add in a 1/2" plate so you can measure the factory U-bolts and if there is at least 1/2" of extra thread you will be good.

If longer U-bolts are needed, you can replace square U-bolts with part # RM-590050-00, or round with part # RM-590050-10.

Have you been getting a lot of sway on those windy passes or long interstate stretches?

expert reply by:
0
Jesse M
Roadmaster Rear Anti-Sway Bar RM25VR
Roadmaster Rear Anti-Sway Bar RM25VR
(click to enlarge)
Jesse M. profile picture
Etrailer Expert

Jesse M.

2/10/2026

Hey Rick, how did things go with the front and rear Roadmaster sway bars on your Bounder? Did they help cut down the sway on those windy stretches? Your feedback could really help others setting up the same chassis.

Rick T. profile picture

Rick T.

2/10/2026

@JesseM Taking it to have them installed tomorrow. We will see how it goes! Thanks for checking.
Jesse M. profile picture
Etrailer Expert

Jesse M.

2/11/2026

@RickT Ok Awesome! I hope all goes well. You know where to find me if you need anything!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>