Best Base Plate And Flat Tow Wire Harness For 2026 Jeep Wrangler Rubicon X
Updated 01/28/2026 | Published 01/12/2026
Products Featured in This Question
Question:
Hi. I have a few questions regarding flat towing products for my Jeep. I recently bought a new 2026 Jeep Wrangler Rubicon X 4 door and I need to fit it with a baseplate and taillight wire harness. I have been towing my previous Jeep and I have a BlueOx Alpha tow bar and Patriot brake system. In the past I had a BlueOx baseplate and BlueOx wire harness installed on the Jeep. I need some assistance picking the best baseplate and wire harness for my new Jeep. Although I was happy with the BlueOx baseplate, Im thinking the Demco DM9519339 will be a better option as I am hoping for a cleaner install less obtrusive when not it use and the included replacement skid plate. IS this a good option for my Jeep and is it compatible with my BlueOx Alpha without any adapter? Regarding the wire harness, I used the BlueOx in the past and didntt have any problems with it. My new Jeep has LED tail lights. Is the BX88368 still a good option for me? Any concerns with tail light and turn signal operation with my LED tail lights? I also looked at the RM63MR but it looks like a bit more involved install. Can you guide me on the best harness for my 2026 Rubicon X? TY
asked by: Gary L
Expert Reply:
Hey Gary, thanks for reaching out. You are on the right track here. The Demco Tabless Base Plate Kit # DM9519339 is the best base plate option for your 2026 Wrangler Rubicon X. It will be a much cleaner install since it comes with a replacement for the factory skid plate, which will be permanently removed. Also, the Demco base plate will be directly compatible with your Blue Ox tow bar - no adapters needed.
As far as the wire harness, the Blue Ox # BX88368 is compatible with your Jeep. In my experience these Blue Ox (Hopkins) wire harnesses are not the most reliable solution. They can work fine but we have seen a ton of returns on these and we hear about a lot of problems so I just don't have a ton of faith in them. If they have worked well for you in the past, and you are wanting a non-invasive plug and play harness then by all means use one.
What I typically recommend are the diode kits like the # RM63MR you mentioned. They aren't too hard to install but you do cut wires and install diodes in line. The diodes are a much more reliable solution that if properly installed will basically work for as long as you own the car. Also the # RM63MR kit uses a 6-pin plug for the front of the Jeep. The 6-pin plug is preferred because it allows you to run a charge line from the motorhome 7-way to the Jeep battery. This is recommended since the braking system does put a small drain on the battery. In my opinion the diode kit is the best option. Totally up to your preference though.
All that said, I will go ahead and provide a parts list for you. Here is what I recommend:
- Demco Tabless Base Plate Kit - Removable Arms # DM9519339
- Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights - 7-Way to 6-Way Adapter Cord # RM63MR
- Roadmaster Battery Charge Line Kit for Towed Vehicles # RM-156-25
- 12 Volt Outlet Kit, 20 amps # RM-9332
We also have a new breakaway for your Patriot system, part # BRK2505 if you need one of those.
Let me know if you have any other questions, or if there is anything else I can do to help!
(click to enlarge)
Product Page this Question was Asked From
Demco Tabless Base Plate Kit - Removable Arms
- Tow Bar Base Plate
- Removable Draw Bars
- Twist Lock Attachment
- Completely Hidden
- Demco
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: tow bar cover
- Search Results: tow bar
- Search Results: demco tow bar
- Shop: etrailer XHD Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,500 lbs
- Shop: Base Plate for Tow Bar
- Shop: Vehicle Tow Bar Wiring
- Shop: Demco Tabless Base Plate Kit - Removable Arms
- Shop: Curt Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches
- Video: Comprehensive Review: etrailer XHD Non-Binding Tow Bar
- Search Results: patriot brake
- Search Results: receiver extension
- Search Results: base plate for tow bar
- Search Results: demco cover
- Shop: Demco Excali-Bar III Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,500 lbs
- Shop: Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights - 7-Way to 6-Way Adapter Cord
- Shop: Vehicle Tow Bar Brake System
- Video: Demco Tabless Base Plate Kit Step-By-Step Installation - 2025 Jeep Wrangler Unlimited
- Shop: etrailer Tow Bar Cover for Blue Ox, Roadmaster, Demco, Curt, and etrailer Tow Bars
- Shop: Blue Ox Alpha Non-Binding Tow Bar - RV Mount - 2" Hitch - 8,000 lbs
- Q&A: Base Plate Kit For 2020 Jeep JL With Winch and Steel 3-Piece Bumper
- Q&A: Does Base Plate for 2019 Jeep Wrangler with Steel Bumper Replace Skid Plate
- Q&A: Recommended Wiring Harness and Baseplate for a 2024 Jeep Wrangler Sahara
- Shop: Replacement Top
- Video: How to Set Up Your 12 Volt Outlet Kit, 20 amps on a 2018 Jeep JL Wrangler Unlimited
- Video: An In-Depth Look at the Blue Ox Tow Bar Adapter Brackets for Demco Tabless Base Plates
- Video: 2024 Jeep Wrangler Unlimited etrailer Invisible Base Plate Kit: Complete Installation
- Video: How to Install the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit - 2023 Jeep Wrangler Unlimited
- Video: Checking Out the etrailer Universal Tow Bar Cover
- Q&A: No Splice Tow Bar Lighting Recommendation for 2025 Jeep Wrangler Sport
- Q&A: Do You Have a Picture of the etrailer Invisible Base Plate Kit Installed on a 2020 Jeep Wrangler?
on Tow Bar Base Plate
Jesse M.
1/27/2026
Hey Gary, how did the Demco base plate and Roadmaster diode kit work out on your new Wrangler Rubicon X? I’m curious if the cleaner look and the charge line setup met your expectations. Your feedback could really help others setting up a similar flat tow system.