Recommended Wiring Harness and Baseplate for a 2024 Jeep Wrangler Sahara

Question

Question:

I have a 2024 Jeep Wrangler Sahara I anticipate installing a Demco removable baseplate. I have a question about the wiring kit. Can I use a 7 way to a 4 pin round connection on the 2024 Jeep wrangler? I aski because I currently have a cable that works for that setup.

asked by: Tony P

0

Expert Reply:

No, sorry Tony. You'll need to use a 6-way connector especially if your model Wrangler has ParkSense or LED lights. I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 or if your Jeep has the ParkSense Proximity Sensors, the Roadmaster Wiring Kit for Variable Voltage LED Tail Lights item # RM63MR.

We have two options for Demco baseplates that fit your 2024 Jeep Wrangler, which one you need is going to depend on your bumper. I have listed both below:

Factory Steel Bumper - Demco Tabless Base Plate Kit item # DM9519339

Factory Plastic Bumper - Demco Tabless Base Plate Kit item # DM9519336

Here are the rest of the parts you will need to flat tow a 2024 Jeep Wrangler:

Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar item # e34ZR

Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes. You will also need the Roadmaster Stop Light Switch Kit item # RM-751490 to ensure that your supplemental braking system is properly positioned and working effectively. This kit activates your RV's monitoring system to alert you when the brakes of your towed car are being applied.

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.

expert reply by: Jerred H

0

Tony P.

2/12/2025

I apologize for the mispelling of your name Jerred

Reply

Jerred H.

2/12/2025

@TonyP No, worries! Happens all the time!

Reply

Answer 1

Hey Gary, thanks for reaching out. You are on the right track here. The Demco Tabless Base Plate Kit #DM9519339 is the best base plate option for your 2026 Wrangler Rubicon X. It will be a much cleaner install since it comes with a replacement for…

view full answer...

Answer 2

Hey Dennis, thanks for reaching out. I can definitely help you with a flat tow setup for your 2024 Chevy Trax. I love the decorations on your Jayco RV by the way. USA! I will start with a parts list, followed by a few notes about flat towing your…

view full answer...

Answer 3

Hello Michael, Great question. You are definitely going to want to explore your options before making a decision. If you wanted to keep your current factory steel bumper on your 2019 Wrangler Rubicon then our etrailer Invisible Base Plate Kit -…

view full answer...

Answer 4

Since your front metal 3-piece bumper is factory installed you should have no trouble with the Demco #DM9519339 Base Plate Kit. Just to double-check, make sure you have no obstruction by the bumper or winch in the area under the bumper that is shown…

view full answer...

Answer 5

When installing the Demco base plate kit on a 2019 Jeep Wrangler like your Rubicon you end up removing the skid plate under the vehicle and replacing it with the diamond plate skid plate that comes with this. There is no drilling required to install…

view full answer...

Answer 6

For your 2021 Jeep Wrangler Sahara Unlimited you can use either the etrailer Base Plate #e98948 or the Demco #DM9519336 as long as you have the factory plastic bumper and you will be able to use reuse your existing Blue Ox Aventa II without needing…

view full answer...

Answer 7

Hey Troy, welcome back. We haven't had a chance to install the etrailer Invisible Base Plate Kit item #e44FV so the only picture I have is the one from the installation instructions. I have attached it below. Have you gotten yours installed yet?…

view full answer...

Answer 8

Hey Henry! I would be happy to help you get your 2026 Jeep Wrangler ready for flat towing. You will need the tow bar, base plate, safety cables, wiring, and a supplemental brake system. I recommend the following: -Blue Ox Base Plate Kit - Removable…

view full answer...

Answer 9

Hey Dave, There should be no drilling required to install the etrailer Invisible Base Plate Kit #e44FV, but there is a small section where you'll need to cut a little notch out of the bumper in order for the baseplate to fit.

view full answer...

Answer 10

Hey James, welcome back! The only plug and play wiring harness I have for flat towing is the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR. This has a 4-way connector that plugs into your motorhome. This plug and play harness…

view full answer...

Answer 11

Hey, Bill. If you’re not installing a supplemental braking system, like part #DM86VR, then the answer is no, you won’t need to install a charge line kit (part #RM-156-25). You will, however, want to double-check your owner’s manual for the exact…

view full answer...

Answer 12

Hey Michael, we actually have a cover designed for the Blue Ox Alpha with the part #BX8875. Are you just wanting a cover for the tow bar?

view full answer...

Recommended Wiring Harness and Baseplate for a 2024 Jeep Wrangler Sahara

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching