Frame Mounted Hitch For A 2021 Forest River Wildwood X-Lite

Question

Question:

I was hoping to find a hitch that bolts to the frame rather than the bumper. I have a 2021 forest river wildwood xlite. does this exist?

asked by: matt m

1

Helpful Expert Reply:

Hi Matt!

There are indeed options to add a hitch to the frame of your 2021 Forest River Wildwood X-Lite. The Curt Adjustable Width Trailer Hitch # 13703 is the one I usually recommend as it will fit almost everything.

That said, your frame needs to be between 22" and 72" wide for this to fit properly. I couldn't find a frame measurement anywhere for your camper, so I do recommend double checking that before ordering anything. Odds are you are fine, but I'm a measure twice cut once kind of person. If you end up getting a measurement that this won't cover, just let me know and I can find a better option for you.

One other thing, what are you going to be using the hitch for? This Curt is rated up to 3,500 pounds towing and 350 pounds of tongue weight. It tends to cover most things, but we may have a heavier duty option for you depending on that frame measurement.

expert reply by: Lazer S

1

Curt Hitch 13703 Installed
(click to enlarge)

Matt M.

1/7/2026

I am using it for a bike rack. Six bikes. I need to weigh them. If u have a heavier duty option I am all ears

Lazer S.

1/7/2026

@MattM The Curt Adjustable Width Trailer Hitch Receiver # C13702 will fit frames from 18" to 51" wide, so it is a little more narrow, but it can handle up to 500 pounds of tongue weight. For what you are needing, I think this would be a better option as long as your frame falls somewhere between that 18" and 51" measurement. What kind of bike rack is it? Don't see them for 6 bikes very often.

Matt M.

1/7/2026

It’s a vertical bike rack by Thule. My space between axels is 68” so the other would have to work I am under 300 lbs with bikes and rack so that will probably b fine.

Lazer S.

1/7/2026

@MattM Forgot about the Thule ReVert rack. One thing I do need to note about that rack though, it technically isn't approved for use on a camper (travel or 5th wheel). That doesn't mean people haven't used it with them, but I do have to mention that doing so will void the warranty on it.

Lazer S.

1/8/2026

@MattM It is and is something that will get you more clearance, but I do not recommend it. Those kinds of adapters cut the tongue weight of the hitch in half as it moves the weight out further and makes another spot for things to move around. Anti-rattle devices will help with this aspect, but they will never get rid of all of it. If you can get everything installed and fitting properly without one, it will be the better way to go. That said, if you still want to go with one, make sure there is tongue weight listed. If you look at the Roadmaster # RM-048-8, you can see down the page where is says tongue weight and towing weight. If one you are looking at doesn't say tongue weight anywhere, it cannot be used. I included a link to our page with all our options for you to check out as well. Then to stabilize one, the Roadmaster Quiet Hitch # RM-061 is among my favorites. It's a simple part, but it does a great job.

Helpful Links

dept-pg-hitch_adapters-sf-high~low_adapter-pc-fits_2_inch_hitch.aspx

See All (8) Replies to Matt M. ∨

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

I recommend the Curt Adjustable Width Trailer Hitch Receiver #13703. This receiver will allow you to bolt to an RV frame between 22" and 72" wide. You will need to drill the mounting holes for the frame along with holes in the receiver…

view full answer...

Answer 10

Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…

view full answer...

Answer 11

Hi Chris, that’s a great question and I’m glad you’re checking before loading that bike up. With the Roadmaster adapter part #RO24FR being rated at 400 lbs tongue weight, you’d be right at its limit with your bike and carrier, and once you factor in…

view full answer...

Frame Mounted Hitch For A 2021 Forest River Wildwood X-Lite

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching