Does The Hellwig Rear Anti-Sway Bar HE74GR Fir A 2025 Ford Expedition?

Question

Question:

Does this actually fit a 25’ Ford Expedition?

asked by: Nick H

0

Expert Reply:

Hello Nick. Sadly, no it does not. The Hellwig Rear Anti-Sway Bar # HE74GR will fit the 2007 - 2024 Ford Expedition. It does not carry over to the 2025-current model. The mounts changed.

expert reply by: Jesse M

0

HE74GR
(click to enlarge)

Nick

1/9/2026

You might want to double check that because while waiting for your response I contacted Hellwig directly and it sounds like this sway bar your advertising only fits up to 24’ because in 25’ and up they changed the mounts and it hasn’t even been released for sale yet. No biggie, just thought I would pass my findings on so there isn’t confusion for yourself & other potential customers. Thanks!

Jesse M.

1/9/2026

@Nick Hey Nick thanks for pointing that out! For some reason our listing carried it over to the 2025 and up but I did also just check with Hellwig and according to them fitment for the # HE74GR does stop at the 2024 model. I will work on getting our page updated to reflect this. Thanks again and sorry for any confusion.

Answer 1

Though both the Coil SumoSprings #CSS-1094F and #CSS-1168F are listed as fitting your 2021 Ford Expedition, there is a difference between the two. That being the height of the spring. #CSS-1094F - 2.25" tall #CSS-1168F - 3" tall The…

view full answer...

Answer 2

No, you do not need to disconnect the trailers battery cables in order to install a NOCO battery charger like the #329-GENIUS2. You just connect the red clamp to the positive terminal, then connect the black to the negative terminal or on the campers…

view full answer...

Answer 3

Hey Dan! What are you experiencing when you tow your trailers? If you're getting rear sag with a little bit of body roll I would get the Coil SumoSprings #CSS-1168R for the additional suspension support. If you're primarily getting a lot of…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Thanks for reaching out TY, happy to help! I can see how the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR instructions would be confusing. The first illustration is intended to show the assembly steps, so it can make it look like the end…

view full answer...

Answer 10

To determine if the Carpod Walled Cargo Carrier, part #M2205-01-02 will fit your Suburban, you will need to take a quick measurement. Measure the distance from the hitch pin hole to the furthest rearward point of the back bumper. If this distance is…

view full answer...

Answer 11

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 12

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Does The Hellwig Rear Anti-Sway Bar HE74GR Fir A 2025 Ford Expedition?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching