Installation Instructions for Draw-Tite Hitch for 2024 Hyundai Ioniq 5 SEL

Question

Question:

Please give me links to the manuals and installation guide for this towing kit for my 2024 Hyundai Ioniq 5 SEL AWD.

asked by: Robert B

0

Expert Reply:

Hi Robert; I have attached the installation instructions for the Draw-Tite Max-Frame Trailer Hitch Receiver # DT27YR below. If you plan on towing you will also need the Curt # C59NR for wiring and a ball mount like the etrailer # e67DR

expert reply by: Robin H

0

Robert

10/13/2024

Thank you for your reply. I was able to see the instructions for the wiring kit but not the hitch receiver. This link does not work for me: https://www.etrailer.com/instructions.aspx?pn=DT27YR. Robert Bratton [email protected]

Reply

Robin H.

10/14/2024

@Robert it works for me when I click the link so I'm not sure what the problem is. You can go to it directly using this https://www.towingproducts.net/Application/support/instructions/N76632.pdf

Reply

Robert

10/13/2024

I was able to download the receiver install guide. Thanks.

Reply

Answer 1

To add a hitch to your 2024 Hyundai Ioniq 5, I recommend the Curt item #C98DR. This hitch is custom fit and bolts to your Hyundai with included hardware. This is a class III hitch with a 2" receiver. It has a 2,500 lbs towing capacity and a 200…

view full answer...

Answer 2

Hey Bruce, since the Draw Tite hitch part #DT27YR fits right up under the rear bumper you'd lose right at 2.5 inches of rear ground clearance like you see in the attached picture.

view full answer...

Answer 3

I took a look at the instructions for the Draw-Tite Trailer Hitch item #DT27YR. You will need to trim away a 1.75" x 3.5" portion of your Hyundai's underbody panel. I have linked a screenshot I took from the instructions below so you…

view full answer...

Answer 4

Just a portion of the bumper panel under your 2024 Hyundai Ioniq 5 is needed to install the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver #C98DR I added a cut out from the instructions which shows the amount,…

view full answer...

Answer 5

There is indeed a trailer hitch receiver that fits your 2024 Hyundai Ioniq 5, from Curt. I verified this fit directly with the manufacturer for you, with the correct part number being the following: - Curt Trailer Hitch Receiver #C98DR Additionally,…

view full answer...

Answer 6

Good question, so I double-checked the capacities with the manufacturers for the Draw-Tite and Curt hitches that fit your 2024 Hyundai Ioniq 5, and verified for you they are correct: - 2,500 lbs Towing/250 lbs Tongue Weight: Curt Trailer Hitch…

view full answer...

Answer 7

Hey Bruce, we have the Draw Tite hitch part #DT27YR that fits your 2025 Hyundai Ioniq 5 which I attached a picture from the install instructions that covers where to trim. Since the back of the vehicle is all covered up there's no real way to…

view full answer...

Answer 8

Hello Peter, I am going to let you in on a little secret but you can't tell anyone. Curt actually makes our etrailer hitches, so the Curt Trailer Hitch Receiver - Custom Fit - 2" #C98DR and our etrailer Trailer Hitch Receiver - Custom Fit -…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

When finishing up the installation of your #C98DR you will completely remove the outlined section of the underbody panel. This will leave you with two separate panels to go on either side of the receiver. Make sure you measure 1-1/2" in from…

view full answer...

Installation Instructions for Draw-Tite Hitch for 2024 Hyundai Ioniq 5 SEL

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching