Ground Clearance for Curt Trailer Hitch Receiver on 2025 Chevy Equinox EV
Updated 12/11/2025 | Published 11/30/2025 >
Question:
I watched a review of the Draw tite hitch and saw that the full assembly sits above the low point bottom of battery compartment of the vehicle by a couple of inches. As the Curt sits lower, does it sit above or below the battery compartment. I need the higher tow weight of this hitch but am concerned about ground clearance. Thanks in advance for your response. Ed
asked by: Ed
Expert Reply:
Hi Ed; I can't say if the # C89RV will hang down below the battery box or not. The one measurement we have is the distance from the ground to the top inside of the receiver which is 11". Accounting for the 2" opening and then the collar around the receiver the bottom of the hitch will sit approximately 8-1/2" off the ground.
You can compare that measurement to the battery box to see if it hangs lower. Clearance probably isn't a major concern unless you have a bike rack without built-in rise hanging off the back and you're transitioning to a steep incline like a driveway.
What will you be using the hitch for?
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Troubleshooting Spring Bars Falling Off on Fastway e2 Weight Distribution System
- Shop: Camper Tie-Downs
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 16" Long - 7" Rise, 3" Drop
- Search Results: trailer hitch
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 18" Long - 7 Hole Adjustment
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trunk Bike Rack
- Q&A: Does The EcoHitch EH75KR Sit Lower Than The Curt Hitch C89RV On A 2024 Cadillac Lyriq?
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Does Lower Fascia Panel of 2024 Cadillac Lyriq Get Trimmed to Install EcoHitch
- Q&A: Recommended Trailer Hitch for a 2024 Cadillac Lyriq
- Search Results: demco spare tire mount
- Video: Breaking Down the Demco Spare Tire Mount for up to 4" Tall Trailer Tongue
- Q&A: Will the Demco Spare Tire Mount Work w/ a 15 Inch Wheel w/ a 6 on 5-1/2 Lug Nut Pattern?
- Q&A: Lug Nut Torque for Aluminum Trailer Wheels
- Q&A: Recommended Spare Tire Carrier for 8 Inch Wheel on 3 Inch Tube Trailer Frame
- Search Results: spare tire mount
- Video: etrailer Behind the Scenes with Demco Spare Tire Carriers
- Video: 2023 Chevrolet Equinox Curt Trailer Hitch Receiver: Complete Installation
- Article: Trailer Wiring Diagrams
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Suspension Enhancement



Ed
12/10/2025
Towing a boat that weighs about 900lbs with a trailer that weighs about 1000lbs. Is there an engineering cautionary % cushion in wt ratings for hitches? I noticed the Eco hitch for this car mounts the same as the Drawtight hitch - has the higher clearance like the Drawtight- but is rated for the vehicle rating of 3500 lbs. Is the drawtight weight rating ultra conservative for the design?