What Channel Width Does Curt Hitch C13392 Fit

Question

Question:

Whats the width of the cross member this bolts onto? Im looking for the distance between the two mounting flanges thanks.

asked by: Ian C

0

Expert Reply:

Hey Ian, the width of the channel on the Curt hitch # C13392 is 3-1/4 inches. What are you trying to fit a hitch to?

expert reply by: Jameson C

0

Curt Hitch Channel Dimension
(click to enlarge)

Ian C.

10/5/2025

Cross member on my rv. Bit this is too wide, thanks for measuring so quickly.

Jameson C.

10/6/2025

@IanC No prob! Is what you have a 4 inch width instead? That's a pretty common size on RVs and if so we have the Curt # E-100 for that.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

In order to flat tow your 2022 Jeep Wrangler Rubicon you will need at least 5 main parts. Those parts being a base plate kit, tow bar, safety cables, tow bar wiring and a supplemental braking system. I have listed all of those parts below as well as…

view full answer...

Answer 7

Hi Sidney! I would be happy to put together everything you need to flat tow your 2014 Jeep Wrangler. I recommend the following: -Roadmaster Direct-Connect Base Plate Kit #RM-521448-5 -Roadmaster Falcon 3HD Tow Bar #RM27NQ -Roadmaster 80" Hybrid…

view full answer...

Answer 8

Hey Doug! The Curt RVi Series Towed Battery Charger+ (TBC+) for Flat Towing #RVI74FR actually installs on the vehicle side so it will go in your 2025 Ranger Raptor. Your Jayco probably has a charge line already, which would be a 12V line running…

view full answer...

Answer 9

Hey Jimmy, My go-to hitch recommendation is the etrailer Trailer Hitch Receiver #e98856 because it has a matte black finish which will keep the hitch in better shape longer than the classic glossy black finish we see with the other hitch fits. The…

view full answer...

What Channel Width Does Curt Hitch C13392 Fit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching