How Many Thule Square Bar Adapters Do I Need for a ProRide Bike Rack?

Question

Question:

Hi, how many of theses parts needed for one ProRide rack? Thank you

asked by: Justin

0

Expert Reply:

Hey Justin. You will need three of the Thule Square Bar Adapter item # 1500050552 to attach the Thule ProRide item # TH598004 to a set of square bars. Two in the front and one in the rear. They are sold individually.

I have linked the installation instructions for the Thule ProRide item # TH598004 below so you can see how to get these adapters installed.

What kind of bike do you have?

expert reply by: Jerred H

0

Justin

9/12/2025

Hi Jerred, I have multiple bikes from mountain to road to fixgear. Video was very helpful thank you. I see there are more parts needed then just this bracket. My rack is Volkswagen rebranded Thule and came in without any of them. Any kits available that would have this bracket, the plastic handle, bolts and large block? Thanks

Jerred H.

9/12/2025

@Justin No, it doesn't look like there's any kits. You'll have to buy the parts individually. Replacement Cam-Action Lockable Lever for Thule FastRide, ProRide XT, TopRide or UpRide Bike Rack item # TH46FW Replacement Cam-Action Non-Locking Lever for Thule FastRide, ProRide XT, TopRide or UpRide Bike Rack item # TH23AD Replacement 72 mm T-Screw for Thule ProRide and UpRide Roof Bike Racks - Qty 1 item # TH49PM Replacement 92mm T-Screw for Thule OutRide and ProRide Roof Bike Racks - Qty 1 item # TH99PM Replacement Rear Fastener Plate for Thule ProRide and ProRide XT Roof Mounted Bike Rack - Qty 1 item # TH96FW

Stephan H.

9/17/2026

I could not find the installation video link for the Thule square bar adaptor.

Jerred H.

9/20/2026

@StephanH Here are the links for the installation videos we have on the Thule ProRide XT Roof Bike Rack item # TH598004. I also linked the installation instructions.

Helpful Links

chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.thule.com/-/s/approved/std.lang.all/73/92/667392.pdf?rev=3.2

tv-review-mos-racks-uplift-lift-assist-for-roof-bike-rack-mr36zv.aspx

tv-review-thule-proride-xt-frame-mount-roof-bike-rack-th598004.aspx

Answer 1

Yes, you are absolutely right. The Thule Xadapt8 AeroBlade and Xsporter Load Bar Adapter #Xadapt8 for your Criterium 598 bike rack is compatible with Yakima Jetstream crossbars with the top track. Luckily, the common roof rack brands all use the same…

view full answer...

Answer 2

I do have an option for you but under no circumstance can I recommend you drill a hole through the Replacement Wheel Tray part #Y8880845 and attach this directly to your roof rack. It sounds like you are looking for a cost effective way to carry a…

view full answer...

Answer 3

Yes, the Thule Square Bar Adapter for ProRide Roof-Mounted Bike Rack #1500050552 will work with Inno square bars. Inno square bars have the same 7/8" tall x 1-1/4" wide footprint as Thule square bars, so the adapter will work just fine.

view full answer...

Answer 4

I spoke to Yakima and they said you have the King Cobra. These originally came with round bar fittings but you can use the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 if you need to attach to aero bars. The exact fittings…

view full answer...

Answer 5

The arms on the Thule T2 Pro XTR #TH83JV don't have a lock per se but they also won't move when they are down. It requires enough force to move the arms that just normal driving around cannot move the arms. I have never heard of an issue with…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

How Many Thule Square Bar Adapters Do I Need for a ProRide Bike Rack?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching