Will the Thule Square Bar Adapter for ProRide Roof-Mounted Bike Rack Work with Inno Square Bars

Question

Question:

Will this adapter work on Inno square crossbars? Thanks for your help!

asked by: Trent P

0

Expert Reply:

Yes, the Thule Square Bar Adapter for ProRide Roof-Mounted Bike Rack # 1500050552 will work with Inno square bars. Inno square bars have the same 7/8" tall x 1-1/4" wide footprint as Thule square bars, so the adapter will work just fine.

expert reply by: Scott S

0

Answer 1

Hey Justin. You will need three of the Thule Square Bar Adapter item #1500050552 to attach the Thule ProRide item #TH598004 to a set of square bars. Two in the front and one in the rear. They are sold individually. I have linked the installation…

view full answer...

Answer 2

I do have an option for you but under no circumstance can I recommend you drill a hole through the Replacement Wheel Tray part #Y8880845 and attach this directly to your roof rack. It sounds like you are looking for a cost effective way to carry a…

view full answer...

Answer 3

I spoke to Yakima and they said you have the King Cobra. These originally came with round bar fittings but you can use the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 if you need to attach to aero bars. The exact fittings…

view full answer...

Answer 4

There is an a adapter #1500050552 that was designed to allow you to mount the now discontinued Thule ProRide Roof Mounted Bike Rack to Thule's SquareBars however with this rack being NLA I don't see the benefit of using it. Instead, what I…

view full answer...

Answer 5

The arms on the Thule T2 Pro XTR #TH83JV don't have a lock per se but they also won't move when they are down. It requires enough force to move the arms that just normal driving around cannot move the arms. I have never heard of an issue with…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Will the Thule Square Bar Adapter for ProRide Roof-Mounted Bike Rack Work with Inno Square Bars

Product Page this Question was Asked From

Continue Researching