Adjustment Pin Location on 2K Ultimate Trailer Jack

Question

Question:

What is the height from the top of the mounting plate to the outer jack release lever handle? And how thick is that lever handle? Im trying to fit it between two basket supports. I provided the measurements to where Im trying to clear. Ideal length of lever handle 2 Ideal height above top of mounting plate ~3 Thanks. I know this is a niche question for my trailer.

asked by: Rob

0

Jack to Basket Length
(click to enlarge)

Basket Height Dimension
(click to enlarge)

Expert Reply:

Hey Rob!

The pin for the Ultimate Trailer Jack # 322-RDJ-2K sits 3/4" above the mounting plate, is 1" thick, and sticks out 3" from the body of the jack (see attached photo).

The bolt pattern for the mounting plate is symmetrical so you can turn the jack so the pin isn't facing the basket to make it all work.

What happened to your old trailer jack?

expert reply by: Jon G

0

Pin Dimensions for 2K Ultimate Trailer Jack
(click to enlarge)

Jon G.

9/29/2025

Hey Rob, Did you manage to fit the Ultimate Trailer Jack between your basket supports? I'm curious to know if adjusting the jack's position worked out for you. Your experience could really help others with similar trailer setups!

Rob

10/4/2025

@JonG I just placed the order. The jack currently on my trailer is *fine* but I'm looking for the slide up function to get the jack leg out of the way since I use my trailer offroad (NuCamp Tag BD XL w/ lock and roll hitch on a heavily modified Nissan truck) and so I can quickly place an off-road jack wheel. Life happened and i meant to order earlier. I'll let you know when I install it how it went and give some photos. I appreciate the communication from you all.

Jon G.

10/4/2025

@Rob Glad to hear it! Can't wait to hear how the project turns out! We currently don't have a way to add photos to comments, but you will receive an email once you receive the order asking you to leave a review, where you'll be able to add your photos!

Answer 1

The wheel caster you need is the part #JC-102 to be used with the Ultimate Trailer Jack #322-RDJ-2K.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Adjustment Pin Location on 2K Ultimate Trailer Jack

Product Page this Question was Asked From

Continue Researching