Replacement Suspension for a 2010 Keystone Cougar Fifth Wheel
Updated 09/01/2025 | Published 08/28/2025 >
Products Featured in This Question
Question:
I am interested in putting Lippert Road armor equalizer on my camper. Part number 202-101-5191. I also need new leaf springs for the camper as well.The axels have a dexter part number 57920. I would also like to get a wet bolt kit.
asked by: Jeremy B
Expert Reply:
Hey Jeremy!
Happy to help get you set up with all the parts you need. Before I can narrow everything down, I’ll need a bit more information to make sure we get the exact fit.
I was able to confirm that your axle number 57920 uses seals designed for 7K–8K axles. Both the 7K and 8K double eye springs we carry measure 24-7/8" long, part # e64SR for the 7K and part # e89FV for the 8K. You'll want to double check that this length works for your setup. It’s better to go slightly shorter than too long, as longer springs can cause issues with how the springs will sit.
I’ve linked a helpful article below that walks you through how to measure your leaf springs and provides some additional info.
Also, not sure if your setup previously had wet bolts, but since you’ll be replacing the bolts anyway, this is a great time to upgrade the shackles too. There are two length options:
Part # MR86ZR with 2-1/4" long shackles
Part # MR26ZR with 3-1/8" long shackles
Let me know what you think, and feel free to reach out w
Product Page this Question was Asked From
MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Triple Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: cre3000
- Search Results: equalizer
- Search Results: equalizers
- Q&A: Availability of Dexter Leaf Spring 072-079-00 for 8,000 lb Trailer Axle
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Search Results: trailer leaf springs
- Search Results: 4500 lbs trailer leaf springs
- Search Results: 8000 lbs trailer leaf springs
- Q&A: Is Measurement D Correct For 24-7/8" Long Leaf Spring For 8,000 lb Trailer Axles
- Search Results: morryde cre3000
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
- Shop: 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Video: The Low-Down on the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: Let’s Check Out the CE Smith U-Bolt Kit for Mounting Round Trailer Axles
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Q&A: Need New Leaf Springs For 2021 Grand Design Momentum 397
- Q&A: How Tall is the Leaf Stack on the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles EM28AJ?
- Q&A: How To Tell If MORryde CRE3000 Equalizers Fit A 2021 Keystone Hideout 29DFSWE 1 Can I
- Q&A: Best Shock Absorbing Suspension Equalizers
- Q&A: What Leaf Springs, U-Bolt Kit, Equalizers, and Wet Bolt Kit do I Need for My Triple Axle Set-Up?
- Article: How to Raise Your Travel Trailer Height
- Article: Double-Eye Trailer Suspension System Review
- Article: Spring Towing Readiness Checklist
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Accurately Measure Trailer Leaf Springs



