Leaf Spring that Could Fit 2020 Grand Design Solitude 390RK
Updated 01/27/2026 | Published 08/26/2024 >
Question:
Will this product Part Number: e89FV will on a 2020 grand design solitude 390rk?
asked by: Jason A
0
Expert Reply:
Hey Jason, so we know that your 2020 Grand Design Solitude 390RK does have 8k axles so in terms of capacity the leaf spring part # e89FV that you referenced would work but we don't have a way to verify the length of your current springs so you would need to do that too.
If they are right at 25 inches the spring would fit and work great. Hopefully that is the case as this is only size we have at this time
expert reply by:
Jameson C
0
Product Page this Question was Asked From
7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" - Black
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushing
- 8000 lbs
- 1-3/4 Inch Wide
- 7 Leaf
- 24-7/8 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" - Black
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Search Results: equalizer
- Search Results: equalizers
- Search Results: cre3000
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Q&A: Replacement Leaf Spring for 2021 Wolfpack 365PACK16
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Search Results: morryde cre3000
- Q&A: Will 8,000LB Trailer Leaf Springs Improve Ride Quality On Grand Design 7,000LB Axles?
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Video: Let’s Check Out the CE Smith U-Bolt Kit for Mounting Round Trailer Axles
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: The Low-Down on the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Search Results: morryde suspension upgrade kit
- Search Results: leaf spring hanger
- Search Results: morryde alltrek 4000
- Q&A: Is Measurement D Correct For 24-7/8" Long Leaf Spring For 8,000 lb Trailer Axles
- Video: etrailer And Dexter 7-Leaf Double-Eye Spring Comparison
- Q&A: Replacement Leaf Spring for 7k Axle that is 25-1/4 inch
- Shop: Suspension Enhancement
- Shop: RV Mattress
- Shop: Tonneau Cover
- Video: Checking Out the Leer Latitude Soft Tonneau Cover
- Video: Breaking Down the MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers
- Video: Setting up the Leer Soft Tonneau Cover on a 2024 Chevrolet Silverado 2500
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Q&A: How Tall is the Leaf Stack on the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles EM28AJ?


Jameson C.
1/27/2026
Hey Jason, did you get a chance to measure the leaf springs on your Solitude 390RK to see if they’re right at 25 inches? Once you confirmed that, did the springs end up being a good fit? Your update could make it easier for others checking their axle setup.