Replacement Hardware For Curt Trailer Hitch 13252

Question

Question:

Hello, do you happen to have a hardware pack and installation instructions available for a Curt 13252?

asked by: Kevin D

0

Expert Reply:

Hi Kevin!

We do indeed have replacement hardware for the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13252. You will need our Replacement Hardware Kit for Trailer Hitches # RHK. Just enter the hitch part number in the box above the add to cart button (see picture), and you will get all the hardware the hitch originally came with.

What are you planning on using the hitch for?

expert reply by: Lazer S

0

RHK Hitch Part Number Box
(click to enlarge)

Kevin D.

8/30/2025

Perfect, thank you. Now I'll be able to fly my flg again.

Lazer S.

9/1/2025

@KevinD You're welcome! Let me know if there is anything else I can help with! Always happy to help patriotism!

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver part #C13042 is what I recommend for a 1996 GMC Sierra C1500. This hitch features a bolt-on design with hidden crosstube. I checked with Curt and this hitch will work on models with a factory full-size spare tire so it…

view full answer...

Answer 7

I would be happy to Ronald! To add a hitch to your 2018 Jeep Grand Cherokee Laredo, I recommend the Curt item #C13065. This is a class III hitch with a 2" receiver that has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I…

view full answer...

Answer 8

I did some cross referencing with the number you listed and was able to determine that the correct replacement motor is the part #LC125802.

view full answer...

Answer 9

Since U-Haul installed the Curt T-Connector Vehicle Wiring Harness #C24ZV on your 2024 Mazda CX-90 you are probably going to want to have them check it for you. If they are not willing to help you then you are going to want to use a Test Light…

view full answer...

Answer 10

Your trailer is equipped with a Lippert 3,500 pound axle that has a 95 inch hub face length and a 76 inch spring seat length. The closest replacement axle we have available to these specs is the Dexter Trailer Axle #7359765-EB that features a 95 inch…

view full answer...

Answer 11

The Curt 7-Way RV-Style Trailer Connector - Vehicle End #C58155 will connect to the Hopkins 7-Way RV Style Connector with Molded Cable #H20046 to make an extension with the following pin to color combinations because Hopkins uses odd colors. White to…

view full answer...

Replacement Hardware For Curt Trailer Hitch 13252

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching