How Long Is Curt 7 Way Wiring Harness C69CR For 2020 - 2027 Ford Super Duty And Cab & Chassis Trucks

Question

Question:

Part C69CR. How long wiring harness is?

asked by: Antanas

0

Expert Reply:

Hey Antanas, I went to the warehouse and measured for you.

The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # C69CR measures right at about 30" overall plug to plug. This is custom-made to fit the 2020 - 2027 Ford Super Duty F250, F350, F450, F550 Cab and Chassis, F650, and F750 that have the OEM tow package plug there behind the bumper already. It just runs from that OEM plug to the bumper to give the truck a 7 way for trailer brakes etc.

If you don't have the tow package plug, you'd instead want the universal 4 way flat # C58044 then convert to 7 way with the universal # ETBC7.

What setup do you have on your 2026 F550 Cab and Chassis and what are you trying to do?

expert reply by: Andrew N

0

Antanas

10/2/2026

Thank you. That was very helpful.

Andrew N.

10/3/2026

@Antanas You're very welcome!

Answer 1

Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure the…

view full answer...

Answer 2

The only pin that should be continuously showing 12V power on the 7-Way connector on your vehicle is the 12V power circuit which is normally the black wire but not always. In 7-way wiring the 12V auxiliary power feed is carried on the contact at the…

view full answer...

Answer 3

Hey Steven, yes the Curt gooseneck hitch part #C44NQ does fit your 2019 Ford F-250 that has the brackets on the frame rails already for the OEM gooseneck hitch.

view full answer...

Answer 4

Hey Steven! The Cummins Onan EC-AGS+ #CM96MR will still work with your lithium batteries. The limitation is only the low-voltage auto-start feature. Since lithium batteries maintain a fairly constant voltage while discharging, the AGS can't…

view full answer...

Answer 5

Hello Travis, thanks for reaching out. No, the Curt T-Connector Vehicle Wiring Harness #C69CR is not going to be long enough to reach from the factory 7-way to the back of the bed on a 2022 Ford F-350. If you need to add a 7-way to the bed, you will…

view full answer...

Answer 6

Hi Jim; for your 2025 Ford F-350 I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BW73FR. The Turnoverball allows you to store the hitch ball upside down when not in use for full bed access. It also uses a square base so it…

view full answer...

Answer 7

Thanks for the photo, that was a big help. And the answer is yes, your 2023 Ford F-350 Cab & Chassis is 100 percent compatible with the Curt 7-way: - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #C69CR…

view full answer...

Answer 8

Hey there Trace! There are parts of the steel brackets that come into contact with the aluminum bed on your new 2026 F350 Super Duty (congrats on the new truck by the way - those are super nice!). B&W says to use strips of polypropylene tape…

view full answer...

Answer 9

Hi Robert; are you looking for a replacement 7-way or are you trying to add 5th wheel/gooseneck wiring? The Curt #C69CR you were looking at is designed to replace a 7-way at your rear bumper. If you are trying to add a 7-way to your truck bed for 5th…

view full answer...

How Long Is Curt 7 Way Wiring Harness C69CR For 2020 - 2027 Ford Super Duty And Cab & Chassis Trucks

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching