Replacement Hitch Bolt For Yakima KingPin Bike Rack

Question

Question:

Hitch bolt for Yakima kingpin bike rack

asked by: Abner G

0

Expert Reply:

Hi Abner!

We have what you are looking for. The Replacement Anti-Rattle Hitch Bolt for Yakima BigHorn, FlipSide, DoubleDown, and SwingDaddy Racks # Y8890176 technically doesn't list the KingPin, but we have been asked this before and Yakima confirmed that it works fine. In case you needed them, we also have the # Y02412 replacement straps that will also fit the KingPin.

Are you wanting an extra hitch bolt or did the original one disappear?

expert reply by: Lazer S

0

Abner G.

8/14/2025

Ok thank you so much, I lost the one it came with. Also I was wanting to see if there's a lock that fits on that one and a 2" adapter for it. Thank you

Lazer S.

8/14/2025

@AbnerG We do have the lock with the Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS) # Y07235, but the adapter has long since been discontinued, unfortunately. For that, you would need to go with something like the Trailer Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # e63YR as this one doesn't reduce your tongue weight by 50% (most reducers will) and then something like the Lets Go Aero Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span # 63232.

Michael

8/17/2026

I am looking for something similar for my kingpin 4. I have a 2025 subaru forester wilderness with factory rack. the rack has an addition block of metal around the 2" receiver, so the threads on the bolt that came with my rack are not long enough to engage with the lock nut on. from the pics it looks like the Y8890176 has longer threads (and I hope a slightly longer bolt). can you confirm it will work ? Thank You

Lazer S.

8/18/2026

@Michael While I cannot confirm the fit without trying it, I still think I can help. This is 4.28" long with 2.5" of threads. If that's longer than your current one, you should be good to go. If it's the same, you could technically just use a 1/2"-13 bolt that's long enough to clear everything. You would need to either use a lock/spring washer and a nut to keep it place or drill a hole through the end of the bolt to let a clip (like the # 90-04-9216, as an example) hold it in place, but it would work.

Answer 1

Hi Chris, I was able to find the replacement parts for the archived Four Timer (linked below) which is the four bike version of your bike rack that shares the same platform style and it shows the Replacement Hitch Bolt for Yakima HoldUp2, OnRamp, etc…

view full answer...

Answer 2

Hey Alex, I checked with Yakima for you and the older Yakima HoldUp bike racks are able to use the replacement shank, which is the following part number: - Replacement 2" Hitch Shank for Yakima HoldUp Bike Racks #8880580 Per Yakima, this will…

view full answer...

Answer 3

It looks like you purchased the Replacement Mounting Hardware, #Y8890185. This should have come with the square, black shank insert, a square nut that fits inside of the shank insert, a flat washer, a lock washer and a threaded pin and clip. I made a…

view full answer...

Answer 4

The bolt that comes with the #Y8890185 is the same as the #Y8890176. The bolt is a 1/2"-13 bolt that is 4.28" long with 2.5" of threads.

view full answer...

Answer 5

We have actually seen this issue before. The 2" receivers on Toyota trucks and SUVs have a slightly larger diameter on the outside of the receiver tube than most typical 2 inch hitches. This is partially the powder coating, but the steel itself…

view full answer...

Answer 6

Hey Ethan, sorry to be the bearer of bad news but Yakima does not make a longer anti-rattle hitch pin. The pin #Y52FR is the longest one they offer, unfortunately. If there is anything else I can do to help you though, please feel free to let me…

view full answer...

Answer 7

Thanks for the pictures John! I reached out to Yakima and they are aware of the double wall receiver on the new Toyota's but do not have a solution for it as of (09/12/2024). The only solution I have for you today is to drill out the threads on…

view full answer...

Answer 8

Hey David, the Replacement Hitch Bolt Threaded Insert for Yakima HangOver Bike Carriers #Y77TR takes a 5/8" hitch bolt #Y52FR. I'm not too sure why that bolt would be too big because it's designed for this part, it makes me wonder if you…

view full answer...

Answer 9

Good morning Gary; the Redarc Tow-Pro Trail #RED74UR can be installed on your 2025 Toyota 4Runner. Pretty much any brake controller can be installed on a vehicle as long as you have or add a 7-way. This does come with the custom wiring harness that…

view full answer...

Answer 10

view full answer...

Answer 11

Hey Carissa, we do have the replacement Thule part you are looking for with the Yakima part number #Y8890176.

view full answer...

Answer 12

Greetings Carl; I recommend the Redarc Tow-Pro Liberty #RED82CR for your 2025 4Runner. This brake controller is easy to use and incredibly reliable. The main unit installs behind the dash so only the control knob is visible. This gives it an OEM look…

view full answer...

Replacement Hitch Bolt For Yakima KingPin Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching