Longer Hitch Pin for a Yakima Bike Rack Being Used on a 2024 Toyota Tacoma w/the Thicker 2" Receiver

Updated 09/12/2026 | Published 09/06/2024

Products Featured in This Question

Replacement Threaded Hitch Bolt and Anti-Rattle Insert for Yakima SwingDaddy Hitch Bike Rack

(45)

$19.17

etrailer Hitch Receiver Lock - 2", 2-1/2", & 3" Hitches - Chrome

(3797)

$25.51

Question:

Hi I have a Yakima bike rack for a 2inch receiver and the setup works fine on the receiver on my Subaru Outback. I just got a 2024 Tacoma with a 2inch receiver and I have two problems with the installing the rack. 1. The stock bolt that came with the rack is not long enough to protrude through the double wall structure of the receiver on the truck. 2. The threads on the stock bolt are not long enough to engage the locking threads on the rack, again due to the double wall structure of the receiver. What I need, it seems, is a longer lock bolt with longer threads. Do you have something that will work?

asked by: John D

Subaru Outback
(click to enlarge)

2024 Tacoma
(click to enlarge)

Expert Reply:

Thanks for the pictures John! I reached out to Yakima and they are aware of the double wall receiver on the new Toyota's but do not have a solution for it as of (09/12/2024).

The only solution I have for you today is to drill out the threads on your bike rack and use the etrailer Hitch Receiver Lock item # e98881. This is designed to fit both 2" and 2-1/2" receivers so the diameter will be the same and the added length will get you past Toyota's double walled receiver.

expert reply by: Jerred H

John

9/13/2024

Thanks for the quick reply and potential solution. I don't think I'm going to go this route yet since drilling out the threads will eliminate the anti-rattle function they are designed to provide. For trips where I don't need my rack to be locked to the car, I guess I could also use a standard 5/8-11 bolt with enough length to get through the receiver.

Jerred H.

9/15/2024

@John You're welcome John! I totally agree with you on this one. It's pretty extreme solution and yours will get you through for now until Yakima comes up with anti-rattle lock that fits with Toyota's new receivers.

Paul

4/12/2025

@JerredH has anyone come up with a longer threaded hitch pin when using a toyota hitch?

Jerred H.

4/12/2025

The XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches item # SHP2040-XL will fit the wider Toyota 2" receivers. Please note that whatever ball mount or hitch accessory you use with item # SHP2040-XL must have a hollow shank. It will also not work with Yakima bike racks because it has a different thread pitch.

Jesse B.

9/11/2026

Is there any updates on the longer bolt to be used with the 2024 Toyota's?

Jerred H.

9/12/2026

@JesseB Unfortunately, there is not. Yakima has not come out with a longer threaded hitch pin capable of working with the wider 2" Toyota receivers.

Jesse

9/12/2026

@JerredH would you think using a piece of all thread with locking nuts would work?

Jerred H.

9/12/2026

@Jesse Yes, it would. That's been the solution quite a few of your fellow Toyota owners have used to get their bike racks working with the wider 2" hitches.