Replacement Hub and Drum Assembly for 6 Axle
Updated 08/15/2025 | Published 07/20/2025
Products Featured in This Question
Question:
Do I just need a new hub? Does this come with the drum part with the brake shoes and all that? Or is that another part I need? I currently have a 6k axle that has 6x5.5 lug pattern. Are these direct swaps even though they’re different lug patterns?
asked by: Connor W
Expert Reply:
Hi Connor, are you wanting to swap out the bolt pattern or keep it the same? The # 8-219-9UC3-A will fit assuming your spindle uses a 2.25" inner diameter (ID) seal and you want to switch to oil bath. However, you will have to use different wheels to match the 8 on 6-1/2 bolt pattern.
If you want to keep the 6 on 5-1/2 bolt pattern you have now, and you're using grease with a 2.25" ID grease seal, the # K08-201-9B will also work. If you want the same bolt pattern and have a 2.125" ID grease seal you need the # 8-201-9UC3-EZ instead.
All of these come with the drum but the brakes are separate. For replacement brakes you can use the # AKEBRK-7-SA or if you want to stick with Dexter the # 23-458-459.
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: 235/80/16
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Search Results: 023~459~00
- Q&A: How to Determine if Trailer Hub 8-219-9UC3 Would Fit Spindle
- Q&A: What's Difference Between Trailer Hubs # 8-219-9UC3 and # 8-219-9UC3A
- Q&A: Dexter Hub Replacement for Hub Part # K08-219-9B
- Q&A: Can a Standard 7K Axle Be Coverted toi Oil Bath Without Changing the Hubs and Drums
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - KE82EV
- Video: Review of the Dexter Trailer Hub and Drum Assembly
- Video: Comprehensive Review: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 8,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Oil Bath
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Kenda Karrier KR53 ST235/80R16 Radial Trailer Tire with 16" Silver Mod Wheel - 8 on 6-1/2
- Shop: Grease Cap, 2.44" OD Drive In with Plug - Qty 2
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Search Results: dexter 23 458
- Q&A: Correct Pin Out for Truck and Trailer 7-Way Blade Connectors
- Video: Setting up the Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes on a Flat Bed Trailer
- Q&A: What Makes 5200lb and 6000lb Dexter Axles Different Capacity?
- Article: Most Popular Wheel Bearings
- Video: Hands-On with the Dexter Trailer Axle Beam with E-Z Lube Spindles
- Video: All About the #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles
- Q&A: Replacement 4" Drop Spindle For Dexter 7,000LB E-Z Lube Trailer Axle
- Video: Detailed Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Search Results: dexter axle d60
Robin H.
8/15/2025
Hey Connor, did you decide to switch the bolt pattern or keep it the same? I'm curious to know how everything worked out for you, as it could really help others in a similar situation!