bing tracking image

Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-219-9UC3 Review

content loading

Customers compare 8-219-9UC3 to these similar products




Products Featured in this Video



Review of Dexter Trailer Hubs and Drums 8-219-9UC3


Today we're going to take a look at the Dexter Trailer Hub and Drum Assembly #8-219-9UC3. This application fits 5200 lbs. through 7000 lbs. Dexter axle, Dexter axle with spindles that require a 2 1/4 inch ID seal. This is a pretty hefty unit weighing in at 45 lbs. It has a bolt pattern of 8 on 6 1/2 inches and includes everything you see here including bearings, races, seal, oil cap, wheel bolts and lug nuts.

The inner bearing has a replacement number of 25580 and the outer bearing has a replacement number of 14125A in case you need those down the road, they are available right here on etrailer.com. The stud diameter is 1/2 inch. The drum dimensions are 12 inches wide or 12 inches in diameter rather by 2 inches wide. It's a 10 36 seal with a 2 1/4 inch diameter. The capacity for this item is 3500 lbs.

That should about do it for our Dexter Trailer Hub and Drum Assembly #8-219-9UC3.


Jim L.

4/30/2020

Comment about seal inside dia. is incorrect 2.125 or 2 1/8The -A series has the 2.250 or 2 1/4 I.D. seal Confirmed by given spec on product page.

Etrailer Expert

Chris R.

5/3/2020

You are correct - the hub uses the 10-10 oil seal, which features a 2.125" inner diameter. We will get this video updated. Thanks so much for the feedback.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Leah B
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.