Customers compare 23-458-459 to these similar products
Products Featured in this Video
Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at this Dexter 12X2 inch left hand side and right hand side Nev-R-Adjust Electric Trailer Brake Assemblies for a 6,000-lb axle. Now these are electric brakes, so they're easier to install. They offer more user control than hydraulic brakes. Basically, they will require only an electric brake controller, which we do… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Thanks for all that info, that was awesome. And for your 2019 Keystone Cougar 315RLS with a 5,200 lb axle, hub with 6 on 5-1/2" bolt pattern, and Nev-R-Adjust electric brakes, here is exactly what you need: - Dexter Trailer Hub and Drum…
view full answer...Yes, the Dexter manual adjust brakes can indeed be replaced with Dexter Nev-R-Adjust brakes. The correct set of Dexter Nev-R-Adjust brakes for your 5,200 lb axle is part #23-458-459. These are the standard 12" x 2' brakes with a 5…
view full answer...The TruRyde Grease Seal part #RG06-070 and Dexter Oil Seal part #10-63 are both designed for the same size spindle as they have the same dimensions, 2.250" inner diameter and 3.376" outer diameter. That said, the TruRyde is a grease seal…
view full answer...Hey John, so for just a replacement left hand brake assembly for the 6k axle you have you'd want the #AKEBRK-6L but honestly it's best to do both sides at the same time with the part #AKEBRK-6 for even brake application.
view full answer...The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…
view full answer...For hub/drums that fit your 2019 Keystone Cougar with 5,200 lb axles that are made in the US you'd want the part #8-201-5UC3-EZ. That said there aren't any USA made trailer bearings so what comes with are Chinese made. For a set of USA made…
view full answer...For your 5,200 lb axles on your 2021 Keystone Cougar, you can use the Electric Trailer Brake Assembly #AKEBRK-7L-SA for the left hand side and #AKEBRK-7R-SA for the right hand side. The Nev-R-Adjust brakes are just self adjusting brakes just like the…
view full answer...Thank you for the images. This shows me you currently have the Dexter Electric Trailer Brake Kit #23-105-106 on your 2007 Airstream Safari. I recommend upgrading to the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as this will give you…
view full answer...The axle number you gave appears to be either a #10 or #11 Torflex Axle. You can confirm this by checking the bolts where it meets your frame and they will be 8 inches on center. If this is the case then you will use lift kit #K71-707-01. If instead…
view full answer...For your Coachmen Camper you are going to want the Dexter Electric Trailer Brake Kit #23-105-106 for an exact replacement to both the left and right brake assemblies that you currently have. Our part number dropped the -00 at the end. The Dexter…
view full answer...I sent this to Dexter and this is what they sent back: I checked the number and it not a good hub number, and wheel tried pulls up 3,500 sprung axle from 2006 that doesn’t use a Nev-R-Lube hub. I would ask for confirmation on the number or some…
view full answer...I believe you're looking for the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459. This is the same thing you're referencing in your question, measures 12" diameter x 2" wide, and fits 6,000 lb axles with 14 1/2" to…
view full answer...