Why are the Rear Hangers Thinner in Width than the Front Hangers?
Updated 09/02/2025 | Published 06/26/2025
Question:
Are the rear hangers thinner to account for the extra thickness of the shackles? Or do I need a 1/4inch spacer on each side of the leaf spring to account for the offset?
asked by: Preston R
0
Expert Reply:
Hello Preston,
Yes, on the Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear # APS2 the rear hangers are thinner in width to accommodate for the shackle straps installing on the outside to connect to the 1 3/4" leaf springs.
Are you building a trailer from scratch, or replacing the suspension on an older trailer?
expert reply by:
Kate F
0
Single Axle Suspension
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
Continue Researching
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear
- Search Results: 21 inch leaf spring
- Search Results: sp~169275
- Search Results: hanger kit
- Search Results: shackle straps
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Q&A: Do the Shackle Straps Go Inside or Outside the Leaf Spring Hanger
- Video: What to Know About the Shackle Bolt For Double-Eye Springs
- Video: A Closer Look at the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Video: The Low-Down on the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Video: 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles Review
- Search Results: spring hanger
- Search Results: leaf spring hanger
- Q&A: How Far Apart Should the Leaf Spring Hangers Be Spaced With a 26 Inch Long Leaf Spring
- Q&A: Comparing Different Hanger Kits ffor Single Axle Trailer with Double Eye Leaf Spring
- Q&A: How to Pick Out Correct Shackle Length for Trailer Suspension
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Shop: Dexter Single Axle Standard Duty Suspension Kit - Double Eye Springs
- Article: Where to Position the Trailer Axle?
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: Shackle Bolt For Double-Eye Springs - 9/16" Diameter - Plain - 3" Long
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Does Slipper Spring EM98AJ Come With Nylon Bushing And Slipper End Bushing?
- Q&A: What Is Needed To Swap An Axle And Hubs To American Parts On A Harbor Freight Trailer?
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
Kate F.
9/2/2025
Hey Preston, Did you decide to build a trailer from scratch or are you updating an older one with the new suspension kit? I'm curious to know how it turned out, as your experience could be really helpful for others working on similar projects.