Kit includes 1-1/2" tall front hangers, 1-1/4" tall rear hangers, 2-5/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. Components for mounting axle to springs sold separately.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Single-Axle Trailer Hanger Kit for Double-Eye Springs. This kit includes your front hangers, rear hangers, shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. That components for mounting the axle to the springs are sold separately. This kit's going to two leaf springs to your trailer frame. The components are made from a very strong and durable steel construction. The hangers are weld-on installation, and they do have a couple holes on top. Those are designed for spot welds. With this video we just want to go over the components that are included with the kit.
It's going to come with two 1-1/2" tall front hangers. Now the front hangers are these right here. The hight measurement is taken from the center of the 9/16" diameter hole to the very top of the hanger, so that's where we get the 1-1/2" measurement from. Again, nice, durable construction. Steel design.
Couple holes on top for spot welds, and 9/16" diameter holes on the side. Then you're also going to get two 1-1/4" tall rear hangers. Now these do not have bushings. Again, that height measurement is measured from the center of the 9/16" diameter hole to the top of the hanger, so that's where we get the 1-1/4" from. It's also going to come with four 2-5/8" long shackle straps. The length measurement is taken from the center of one hole to the center of the other, so that's 2 & 5/8 of an inch. Again, 9/16" diameter holes.
You're going to get four of those straps, and you're going to get six 3" long x 9/16" diameter shackle bolts, and six 9/16" diameter locknuts. That's going to do it for today's look at the Single-Axle Trailer Hanger Kit for Double-Eye Springs.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.