How to Pick Out Correct Shackle Length for Trailer Suspension
Updated 03/28/2017 | Published 03/27/2017 >
Question:
I have a pop up camper that I want to convert from a slipper spring set up to a doubly-eye set up. Id like to re-use the existing hangers if possible. Just grind out the cylinder that is welded in the existing rear hanger so it can accept a bolt and shackle. After measuring, I got roughly 25.5inch from hole to hole on my existing hangers, so I think the SP-212275 leafs will work. How would I go about determining what length shackle to put on there?
asked by: Jeff
Expert Reply:
Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move.
What is the height difference from the frame of the trailer to the hole on both hangers? With that we can see what would work best as a shackle. You want to go with the shackle length that allows the spring to sit as level as possible.
The most popular size is 2-1/4 inches like the part # TRSL225.
Product Page this Question was Asked From
- Trailer Suspension Parts
- Shackle Links
- Camper
- Car Hauler
- Utility Trailer
- 2-1/4 Inch Long
- TruRyde
more information >
Continue Researching
- Search Results: shackle kits
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" Shackle Straps
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Search Results: rv waste valves
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Shop: Correct Track Trailer Alignment and Lift Kit - Triple Axle
- Search Results: morryde trailer suspension parts
- Search Results: lc279688
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Q&A: How to Measure Replacement Shackles for Single Axle Trailer
- Article: Double-Eye Trailer Suspension System Review
- Search Results: bronze bushing
- Search Results: trailer springs
- Search Results: akhd~545~35k
- Q&A: Determining Correct Shackle Strap Size for Top Brand Tandem Axle Trailer
- Q&A: Can Lippert Correct Track be Used with Dexter E-Z Flex Equalizers
- Q&A: Recommended Cushioned Equalizer Replacement Options For Factory Equalizer 6" Wide and 4" Tall
- Q&A: Can Equa Flex Equalizer be Used with Correct Track Alignment Kit
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: Hands-On with the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Can Longer Shackle Straps be Added to Tandem Axle Trailer
- Q&A: Can Longer Trailer Suspension Equalizer be Replaced with Shorter One
- Article: How to Raise Your Travel Trailer Height
- Video: 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles Review
- Video: MORryde Standard Frame Hanger X-Factor Crossmember Installation - 2022 Grand Design Imagine Travel T
- Video: etrailer Electric Trailer Brakes Review
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly

