What Bearing Seals Do I Need For Dexter 3228669 3,500 lb Axle
Updated 09/02/2025 | Published 06/20/2025
Products Featured in This Question
Question:
Can you tell me what bearing seals I need based off my axle being a Dexter 3228669, 3500lbs? Or will I need the hub p/n? Thank you.
asked by: Cory P
Expert Reply:
Hello Cory, thanks for reaching out. When was your trailer made exactly? I ask because basically any 3,500 lb axle made within the last few decades uses a standard bearing and seal size. As long as your axle is not ancient, it will use a standard seal size which is the following:
- Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles # 58846
If you need a full beating kit, use the following:
- Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle # BK2-100
What kind of trailer is this for?
(click to enlarge)
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: sumosprings
- Search Results: spare tire mount
- Shop: Suspension Enhancement
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Q&A: Replacement Grease Seal for 3,500 lb Dexter Axle on Forest River Trailer
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Hub Bearing Kit 3500LB Axle - BK2-100
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Dexstar Steel Spoke Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black Powder Coat
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
Jesse M.
9/2/2025
Hey Cory, did you find out when your trailer was made and if the standard seal size worked for your axle? I'm asking because it could help others with similar trailers.