Can Reese 49912 Weight Distribution Hitch Part RE94FR Be Used With A 2" Hitch Ball?

Question

Question:

I bought a Reese weight distribution mdl 49912 this week. I need a 2 ball. Can I use any 2 ball with 1 1/4 diameter shaft on this hitch?

asked by: Craig D

0

Expert Reply:

Hello Craig, thanks for reaching out. Yes, the Reese 49912 Weight Distribution Hitch part # RE94FR can be used with a 2" ball as long as it has a 1-1/4" diameter shank. We have one that will work for this. Take a look at the following:

- 2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Stainless Steel - 10K # C69FR

expert reply by: Jesse M

0

C69FR Hitch Ball
(click to enlarge)

Jesse M.

9/8/2025

Hey Craig, did the 2-inch hitch ball with the 1-1/4 inch shank work out for your Reese weight distribution hitch? I'm asking because knowing your experience could help others make the right choice.

Answer 1

Technically since the Reese Pro Round Bar Weight Distribution w Sway Control #RE94FR doesn't have that old school friction sway control bar, like what we see with part #17200, you can back up but only in a straight line. Realistically though…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Welcome back Don! The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item #EQ37120ET is exactly what I would recommend using. This is a solid reliable system and the built in sway control will make a noticeable improvement in ride…

view full answer...

Answer 6

Hi Mike; we don't have a way to swap out the 2" ball on the Andersen Weight Distribution Hitch #AN88VR. We do have the 2-5/16" ball separately, #AN45VR, but we don't have it as a complete system. If you really want the Andersen,…

view full answer...

Answer 7

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Answer 8

Hey Rex! Those are some great questions. A weight distribution hitch (WDH) isn't always needed but in your case you will want one. Typically if the weight of your trailer is more than 50% of the weight of your vehicle it is a good idea to use a…

view full answer...

Answer 9

Hey Jon, I have a solution for you but I would not recommend the Andersen Weight Distribution system part #AN33VR for your 2025 Brinkley Z Air 297. What we have found is that the Andersen system does a decent job with lighter weight trailers but for…

view full answer...

Answer 10

Hello Danny, I’m really glad you mentioned the Equalizer! When sway is the issue, that one and the Weigh Safe are definitely my go-to options. They both have 4 point sway control, with straight spring bars and frame brackets. They can be a little…

view full answer...

Answer 11

Welcome back Belinda! The Andersen Weight Distribution Hitch w Sway Control - 4" Drop/Rise - 16K GTW, 1.6K TW #AN33VR may work for towing your Grand Design Imagine XLS23LDE with your F-250. However, when we tested it a while back, we didn't…

view full answer...

Answer 12

Hey there Layla! There are a few different forms of weight distribution hitches, but the majority of the systems that have sway control use friction bars, which work similar to brake pads on your vehicle. This works really well, but it can sometimes…

view full answer...

Can Reese 49912 Weight Distribution Hitch Part RE94FR Be Used With A 2" Hitch Ball?

Products Featured in This Question

Continue Researching