Can Curt T-Connector Still be Installed if a 2024 Ford Maverick Has the Factory Tow Package?

Question

Question:

Can C59DR be used on 2024 Maverick with factory trailer tow package.

asked by: Bill T

0

Expert Reply:

Hey Bill, thanks for reaching out!

Yes, you can still install the Curt T-Connector Vehicle Wiring Harness # C59DR even if your 2024 Ford Maverick has the factory tow package. This wiring tees in behind the tail lights and then pulls power straight from the battery with the black wire so it will be a separate system from your tow package.

Are you using this to get the lights working on something like a truck topper?

expert reply by: Jon G

0

Curt Wiring Teed in Behind 2024 Maverick Taillight
(click to enlarge)

Bill T.

5/28/2025

Jon; Thanks for the reply, I want to add some brake/running/turn LED light strips without deactivating the safety systems like happens when using the trailer connections. Sounds like this will work.

Jon G.

5/29/2025

@BillT This would 100% work and makes complete sense for what you're wanting to use it for!

Answer 1

Hey Fred, The best hitch for your 2025 Ford Maverick is the Curt Trailer Hitch Receiver #C84BR because it has the heaviest weight rating and installed right behind the cutout in your bumper so you get a clean looking installation as well. To wrap up…

view full answer...

Answer 2

The only part of the Curt T-Connector Vehicle Wiring Harness #C59DR you would be able to use to run the wiring for your flat tow setup on your 2024 Ford Maverick is the tail light connectors. You will need to connect the diodes and wiring from the…

view full answer...

Answer 3

Howard, I totally get what you’re running into here, and you’re not alone, this is a common headache on newer Mavericks with BLIS. The issue isn’t the light bar itself, it’s that anything plugged into the trailer connector tells the truck a trailer…

view full answer...

Answer 4

Hello Warran, we sure do! For the 2025 Ford Maverick Hybrid without LED taillights you will need the following: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C29PQ What are you planning to tow first with your Maverick?…

view full answer...

Answer 5

The Curt trailer wiring harness part #C59DR that you referenced is rated for up to 5 amps per stop/turn circuit and 7.5 amps for the running light circuit. While this is less than 20 amps we still have to recommend you run the power wire for this kit…

view full answer...

Answer 6

Hey Matthew, are you sure the problem isn't the trailer taillights? Do you have a circuit tester that you could test the pins of the 4-way with to see if you can find out if the problem is for sure on the vehicle or trailer side?

view full answer...

Answer 7

You need to route the 12V power wire from the Curt T-Connector Vehicle Wiring Harness with #C59DR up to the battery under the hood of your 2022 Ford Maverick, which we demonstrate how to do in the linked installation video. I also recommend picking…

view full answer...

Answer 8

The 12V power lead for any wiring kit, including the Curt T-Connector #C59DR for your 2022 Ford Maverick, will potentially need more power than a 12V socket will be able to provide. The whole point of having a separate power and module in a kit like…

view full answer...

Answer 9

Newer vehicles have much more delicate taillight circuits than older vehicles which is why they can't handle powering additional trailer taillight circuits. This is why the harnesses that fit your Maverick like the #119147KIT require running the…

view full answer...

Answer 10

We get this question a lot but unfortunately our answer is always the same, you must run a wire all the way up to the battery when installing a trailer wiring harness like the Curt T-Connector Vehicle Wiring Harness part #C59DR. The reason for this…

view full answer...

Answer 11

Hey Geroge! You can use the Curt T-Connector Vehicle Wiring Harness #C59DR, but you'll also need an adapter that separates out the stop signal from your turn signals. The 3rd Brake Light Logic Module #PP20-702 is a great tool to use for this, but…

view full answer...

Answer 12

Hey Dalton, the trailer wiring harness installs are not known to cause hyperflashing unless maybe something was installed wrong. Does the trailer wiring actually function too? I would check to make sure you have the fuse installed in the harness and…

view full answer...

Can Curt T-Connector Still be Installed if a 2024 Ford Maverick Has the Factory Tow Package?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching