Looking For Replacement Hubs For 2016 Trailstar Tandem Axle Boat Trailer
Updated 04/29/2025 | Published 04/25/2025
Products Featured in This Question
Question:
I have a 2016 trailstar tandem axle boat trailer with a GAWR of 2960 and I need to buy some replacement hubs. Would I need hubs that fit a 3500lb axle or something different? 5 on 4 1/2 bolt pattern
asked by: Tyler B
Expert Reply:
Hello Tyler, thanks for reaching out. We should have a hub that will work for you, but unfortunately hubs require either knowing your bearings or precise measurements since they aren't universal. A 2,960 lb axle is also not common/standard.
To find your bearings, you just need to take it apart and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you can't make out the numbers, you need to use digital caliper and measure your spindle to the thousandths of an inch where the bearings and grease seal ride. You can use the photo I've attached to see exactly where you need to measure.
The typical 3,500 lb axle uses a # L68149 (1.378" inner diameter) inner bearing and # L44649 (1.063" inner diameter) outer bearing. If this is what you have, the # 84546UC3 hub/drum you were looking at would be correct.
If that is not what you need, get back to me with your bearing sizes/measurements and I am happy to look into it.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Aluminum Trinity Series Trailer Wheel - 13" x 4-1/2" - 5 on 4-1/2 - Machined Black Fork
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Shop: 35 ft. Wishbone 4-Way Trailer Wiring Harness with 30" Ground Wire
- Shop: Demco Channel Tongue Trailer Coupler - eZ-Latch - Zinc - 2" Ball - Bolt On - 7,000 lbs
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Q&A: Replacement Hub Recommendation for Tracker Trail Star Trailer
- Q&A: How To Add Brakes to 2001 ShoreLand'r Boat Trailer with 2960 GAWR
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Search Results: trailer jack
- Search Results: trailer leaf springs
on Trailer Hubs and Drums
Tyler B.
4/28/2025
Thanks! I haven’t got a chance to pull the bearings out yet but I do know the number 46210 is stamped in the back of the hub. Does that number tell you anything?