Does the Curt Hitch C13383 Fit a 2025 Chrysler Pacifica Hybrid?

Question

Question:

I bought this hitch Part Number: C13383for my 2019 Chrysler Pacifica Limited Hybrid in 2019 and it has worked perfectly. I now am getting a 2025 Pacifica Pinnacle Hybrid. On your website you have listed the same part for both the standard and the Hybrid models. However the one for the Hybrid states it is not for the hybrid in the description. I was going to swap this to the 2025, now I am not so sure. Please advise

asked by: Kevin S

0

Expert Reply:

Hey Kevin! The Curt Hitch item # C13383 does fit the hybrid models of the 2025 Chrysler Pacifica. You're going to want to replace the hardware though. You can't retorque those bolts when you reinstall the hitch on your new van. You'll need the Replacement Hardware Kit for Trailer Hitches item # RHK.

When you go to the main page for the item # RHK you'll want to input C13383 where it says Hitch Item Number. This will give you all new hardware, spacers, and the fishwire tool you need to get the bolts installed.

I have linked the installation instructions below for the item # C13383 hitch so you can see how to get it set up. If you have any additional questions feel free to throw them into the comment box below.

expert reply by: Jerred H

0

Kevin S.

4/17/2025

Thanks Jerred, I didn't know about not reusing the bolts. Great tip! Ordering these and the wiring harness also today.

Reply

Jerred H.

4/17/2025

@KevinS You're welcome Kevin! Happy to help! The correct wiring harness for a 2025 Chrysler Pacifica Hybrid is the Curt item # C47VV. This will give you a 4-Way connector. To attach this harness to your hitch to prevent it from being damage you will want the No-Drill Mount for Electrical Mounting Bracket item # 18140 and the Mounting Bracket 4-Pole Flat item # 18144.

Helpful Links

tv-install-curt-trailer-wiring-2023-chrysler-pacifica-c59236.aspx

Reply

Kevin S.

4/17/2025

@JerredH . Just realized that the bracket in step 5 was not removed from the old vehicle. Step 5. On Hybrid models only: temporarily remove emissions canister on driver side frame rail using 10mm socket to remove (2) bolts. Use provided M6 hardware to reinstall. Is there a replacement bracket and screws available? Thanks again. Kevin S.

Reply

Jerred H.

4/18/2025

@KevinS I am sorry it is not. That is an OEM part and we do not offer it. I recommend checking your local auto parts store or reaching out to a Chrysler dealership.

Reply

Answer 1

Yes, the Curt Trailer Hitch Receiver #C13383 will fit your 2024 Chrysler Pacifica Touring Hybrid. This Class III hitch has a 2" receiver and a bolt-on installation. It also comes with a limited lifetime warranty. If you would prefer matte black…

view full answer...

Answer 2

The Curt #C29UR and the Draw Tite part #76046-SK are definitely the most hidden options for your 2021 Chrysler Pacifica Hybrid but the edge goes to the Curt in terms of least visible since the safety chain loops are horizontal and smaller. I attached…

view full answer...

Answer 3

Between the Curt Trailer Hitch item #C29UR and item #C13383, I recommend the item #C29UR because it doesn't hang down as much. Both hitches are confirmed to fit the 2022 Chrysler Pacifica Hybrid and have identical 4,000 lbs towing capacities.…

view full answer...

Answer 4

Hello Tim. For the Curt #C13383 hitch, there is a chance you will need to enlarge the holes for both Hybrid and non hybrid models. It completely depends on the size of the holes in the frame rail. There can be some variances in the size of these…

view full answer...

Answer 5

When it comes to installing a hitch on your 2022 Chrysler Pacifica Pinnacle Hybrid #C29UR will not fit your vehicle. Per the manufacturer The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch #C13383 will bolt right up to the frame of…

view full answer...

Answer 6

Great news! We do offer a a hitch for your 2018 Chrysler Pacifica Hybrid. I recommend the Curt Class III Round Tube Receiver Hitch part #C13383 because the 2" hitch will be the most versatile when it comes to accessories like bike racks. There…

view full answer...

Answer 7

For your 2021 Chrysler Pacifica Pinnacle Hybrid we have the 2 inch Draw Tite hitch part #76046-SK as a confirmed fit that is mostly hidden and has great towing capacities. Then for plug and play trailer wiring we have the Tekonsha kit part #TK96FR…

view full answer...

Answer 8

For the Curt hitch part #C13383 that you referenced you do have to enlarge holes on the driver side frame rail to fit the hitch on the hybrid models of the 2019 Chrysler Pacifica. I attached a picture that shows this. The picture on the left shows…

view full answer...

Answer 9

For your hybrid 2022 Chrysler Pacifica, the best option we have is the Curt Hitch - 2" #C29UR. The great thing about the Curt hitch is that it comes with a gloss outer coating over the base coat that provides superior rust and corrosion…

view full answer...

Answer 10

That's a ground strap that you have circled in your picture. You can basically run that to any metal bolt that touches the metal frame and you'd be fine, but if you were to use it on the same bolt it would have to go over the hitch flange and…

view full answer...

Answer 11

The answer to your first question can get pretty involved, but in summary purchasers of aftermarket vehicle products are protected by the Magnussen-Moss Warranty Act which states that installing a hitch won't void a vehicle warranty unless the…

view full answer...

Answer 12

I took a look in the owner's manual for your 2019 Chrysler Pacifica Hybrid and saw where it said that towing a trailer is not permitted. However, it does not say that you cannot install a trailer hitch for a cargo carrier so you should not worry…

view full answer...