Can I Install a Trailer Hitch on a 2019 Chrysler Pacifica Hybrid for a Cargo Carrier

Question

Question:

Chrysler says towing a trailer is prohibited. They say nothing about a simple cargo carrier. towing a trailer would void the $8,000 warranty on the big hybrid battery. However, all I want to do is to attach my 500lb rated cargo carrier 2 inch on the back to the hitch. My thinking is that if I could find a class 1 hitch that is rated at pulling no more than say1,000 pounds and I did not install a light harness because I do not intend to pull any trailor I could maintain that I could’t Actually legally pull any trailer and really just use it for the cargo carrier. Can you find such a hitch for me? Thanks for any help you can give me.

asked by: Michael

1

Helpful Expert Reply:

I took a look in the owner's manual for your 2019 Chrysler Pacifica Hybrid and saw where it said that towing a trailer is not permitted. However, it does not say that you cannot install a trailer hitch for a cargo carrier so you should not worry about voiding your warranty. You are also protected under the Magnuson-Moss Warranty Act which simply states that the manufacturer cannot void your warranty just because you installed an aftermarket part on your vehicle. The part would have to be the cause of the failure and they would have to prove that you used the vehicle incorrectly. The burden of proof would not be on you to prove that you didn't but rather them to prove that you did so you have nothing to worry about.

Therefore, I recommend using the Curt Trailer Hitch Receiver part # C13383 (Class III) which has a 2" receiver tube opening and will not require any drilling to install on your vehicle as it uses predrilled holes in the frame rails. If you used the Curt Trailer Hitch Receiver part # C12180 (Class II) then you would need an adapter for your cargo carrier which would then cut your weight capacity in half so this is not what I recommend.

I have attached a sample install video for you as well though it is not on a Hybrid but will still be the same.

expert reply by: Conner L

1

Answer 1

Hey Kevin! The Curt Hitch item #C13383 does fit the hybrid models of the 2025 Chrysler Pacifica. You're going to want to replace the hardware though. You can't retorque those bolts when you reinstall the hitch on your new van. You'll need…

view full answer...

Answer 2

Yes, the Curt Trailer Hitch Receiver #C13383 will fit your 2024 Chrysler Pacifica Touring Hybrid. This Class III hitch has a 2" receiver and a bolt-on installation. It also comes with a limited lifetime warranty. If you would prefer matte black…

view full answer...

Answer 3

For your hybrid 2022 Chrysler Pacifica, the best option we have is the Curt Hitch - 2" #C29UR. The great thing about the Curt hitch is that it comes with a gloss outer coating over the base coat that provides superior rust and corrosion…

view full answer...

Answer 4

Great news! We do offer a a hitch for your 2018 Chrysler Pacifica Hybrid. I recommend the Curt Class III Round Tube Receiver Hitch part #C13383 because the 2" hitch will be the most versatile when it comes to accessories like bike racks. There…

view full answer...

Answer 5

Between the Curt Trailer Hitch item #C29UR and item #C13383, I recommend the item #C29UR because it doesn't hang down as much. Both hitches are confirmed to fit the 2022 Chrysler Pacifica Hybrid and have identical 4,000 lbs towing capacities.…

view full answer...

Answer 6

When it comes to installing a hitch on your 2022 Chrysler Pacifica Pinnacle Hybrid #C29UR will not fit your vehicle. Per the manufacturer The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch #C13383 will bolt right up to the frame of…

view full answer...

Answer 7

For the Curt hitch part #C13383 that you referenced you do have to enlarge holes on the driver side frame rail to fit the hitch on the hybrid models of the 2019 Chrysler Pacifica. I attached a picture that shows this. The picture on the left shows…

view full answer...

Answer 8

The Curt #C29UR and the Draw Tite part #76046-SK are definitely the most hidden options for your 2021 Chrysler Pacifica Hybrid but the edge goes to the Curt in terms of least visible since the safety chain loops are horizontal and smaller. I attached…

view full answer...

Answer 9

For your 2021 Chrysler Pacifica Pinnacle Hybrid we have the 2 inch Draw Tite hitch part #76046-SK as a confirmed fit that is mostly hidden and has great towing capacities. Then for plug and play trailer wiring we have the Tekonsha kit part #TK96FR…

view full answer...

Answer 10

Hello Tim. For the Curt #C13383 hitch, there is a chance you will need to enlarge the holes for both Hybrid and non hybrid models. It completely depends on the size of the holes in the frame rail. There can be some variances in the size of these…

view full answer...

Answer 11

The answer to your first question can get pretty involved, but in summary purchasers of aftermarket vehicle products are protected by the Magnussen-Moss Warranty Act which states that installing a hitch won't void a vehicle warranty unless the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Can I Install a Trailer Hitch on a 2019 Chrysler Pacifica Hybrid for a Cargo Carrier

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching