Will Trimax Universal Anti-Rattle Clamp for Class V Trailer Hitches Fit Ford Truck

Question

Question:

I have a Ford truck with a 2-1/2" receiver on the back. Is this going to work for me?

asked by: Mark W

0

Expert Reply:

Hey Mark! The Trimax Universal Anti-Rattle Clamp for Class V Trailer Hitches # TMX66SR will fit your Ford truck. This is a universal anti-rattle designed to work with any 2-1/2" receiver. If you need anything else feel free to reach out in the comments below.

expert reply by: Robin H

0

Trimax Universal Anti-Rattle
(click to enlarge)

Mark

5/7/2025

Thanks! I thought it would but I always feel better if I double check first.

Robin H.

5/8/2025

@Mark of course, I'm the same way. Happy to help!

John

7/27/2025

I have a Ford f350 with the 3" receiver. I have an equalizer 16k hitch setup with a 2.5" shank and am running a Ford 3" to 2.5" reducer sleeve, but am getting a lot of slop. Can I run the trimax anti-rattle?

Robin H.

7/28/2025

@John it won't fit over your receiver correctly. You need something designed for a 3" like # BLU85QR. I would also consider switching to a 3" shank like # BPH85RR which is compatible with your Equal-i-zer system.

Answer 1

Hey Bill! The Trimax Universal Anti-Rattle Clamp #TMX66SR will fit your receiver. It actually sits on the top of the shank of whatever you put in and then the lip pulls up on the bottom of the receiver tube. See the attached photo. That design…

view full answer...

Answer 2

Hey Bert, yes the etrailer hitch sleeve reducer part #e28JR will work great for you when towing a 7,500 lb travel trailer. Your WD system will put so much torque into the hitch tube that it will not slide around at all and it will be pinned in place…

view full answer...

Answer 3

Hi Kristian, great question! The etrailer Anti-Rattle Hitch Collar, part #e55YV, works by taking the slack out between your hitch receiver and the shank of your ball mount or hitch-mounted accessory. It clamps around the outside lip of your 2-1/2…

view full answer...

Answer 4

Hey Scott! The etrailer Anti-Rattle Hitch Collar #e55YV is rated for up to 10,000 lbs gross trailer weight and won't reduce the capacity of a properly matched towing setup. As always, your actual towing capacity is determined by the lowest-rated…

view full answer...

Answer 5

Hey Mike, congratulations on the new truck! You can definitely use the two together. The Curt StowPro 2-Ball Mount #C34FR53HY uses a standard 2-1/2" shank, making it a great match for our etrailer Anti-Rattle Hitch Collar #e55YV. It installs…

view full answer...

Answer 6

Hey Greg! The etrailer Anti-Rattle Hitch Collar for 2.5" Hitch Receivers #e55YV is not compatible with a weight distribution hitch. This is really the only restriction for our anti-rattle. If you need an anti-rattle for a weight distribution…

view full answer...

Answer 7

Welcome back Dan! The Trimax Universal Anti-Rattle Clamp item #TMX66SR is extremely effective at adding stability when used with heavy setups. Since last years upgrade to wingnuts from standard nuts and the inclusion of lock washers we have not…

view full answer...

Answer 8

In addition to the base plates like the Blue Ox set you have for your 2022 Chevy Spark, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars…

view full answer...

Answer 9

Hey Joe, The reducer that you are using, is it just the sleeve style that slides into your 2-1/2" hitch or do you have a reducer that extends out past the receiver? If you are just using the sleeve style then the Trimax #TMX66SR anti-rattle…

view full answer...

Answer 10

When you install gutter extenders like the part #372655-BK-A that you referenced you will remove the screw on the end of the gutter that you will be installing these on and then will slip the extender behind it and then screw it back in place through…

view full answer...

Answer 11

The closest thing we have is the Roadmaster Anti-Rattle Hitch Extender for Tow Bars #RM-071-1075 which measures 7 3/4" long and has a 10,000 lb GTW, the only problem is this extender only has a 400 lb tongue weight capacity.

view full answer...

Answer 12

The Roadmaster Anti-Rattle Hitch Extender #RM-071-1075 comes with the threaded bolt and pin. This threaded hitch bolt does indeed reduce noise and movement inside the hitch receiver, providing a more secure and quiet connection. However, there is not…

view full answer...

Will Trimax Universal Anti-Rattle Clamp for Class V Trailer Hitches Fit Ford Truck

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching