Torque Wrench that is Rated for up to 136 ft lbs

Question

Question:

Instructions state tighten bolts to 136 ft/lbs with torque wrench. My wrench only goes to 100 ft/lbs. Local loaners have needle type wrenches that go to 8oo ft/lbs. thoughts?

asked by: paul

0

Expert Reply:

Hey Paul, we have the Powerbuilt Dual Drive Torque Wrench part # ALL944001 which can go up to 150 ft lbs. If you are unable to find one local to you this would be a great option.

expert reply by: Jameson C

0

Paul

12/16/2024

thanks for the option

Jameson C.

12/16/2024

@Paul Glad to help!

Answer 1

Hello Chuck, thanks for reaching out. We do carry two hitches for the 2025 Honda Pilot, the Curt #C22HR and the etrailer #e27KR. Both hitches are structurally identical since our etrailer brand is actually manufactured by Curt. The only noteworthy…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 8

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 9

Hey Kelly! The Curt 13146 fits 2016 - 2022 Honda Pilot. What you need for your 2026 Honda Pilot is the Curt #C22HR. This has a bolt-on installation and does not require any cutting or trimming of the bumper so you won't be modifying the vehicle.…

view full answer...

Answer 10

Hey Rob, congrats on the new SUV. To add a hitch to your 2026 Honda Pilot, I recommend the etrailer item #e27KR. This hitch is custom fit for your Pilot and comes with all hardware necessary for installation. The etrailer item #e27KR is a class III…

view full answer...

Answer 11

Hey Mark, congrats on the new SUV! The best hitch for your 2026 Acura MDX, is going to be our etrailer item #e27KR. This custom fit class III hitch has a 2" receiver, which will provide you with 6,000 lbs towing and 900 lbs tongue weight…

view full answer...

Answer 12

To add a 2" hitch to your 2023 Honda Pilot, I recommend the etrailer Hitch item #e27KR. This hitch is custom fit and bolts to your Pilot with included hardware. This is a class III hitch with a 2" receiver. It has a maximum tongue weight of…

view full answer...

Torque Wrench that is Rated for up to 136 ft lbs

Product Page this Question was Asked From

Continue Researching