Recommended Trailer Hitch And Wiring For A 2022 Toyota Highlander XSE

Question

Question:

Looking for a 2 trailer hitch for a 2022 Toyota Highlander XSE. Looking at your offerings I see that they all exclude the XSE trim level. Any suggestions? Thanks

asked by: Tom C

0

Expert Reply:

Hey Tom,

The verbiage is a bit weird because the whole category is separated on whether or not it's compatible with XSE models so most will say "excluding XSE models" and "XSE models", meaning that it can work with both. For your Highlander I recommend the etrailer Trailer Hitch Receiver # e75ZR. It's a super easy install, butting right up to the bottom of the frame rails and bolting in place using factory weldnuts in the frame. I've attached a video below where Ryan will walk you through the process.

I also recommend picking up the Tekonsha # TK99FR if you don't have the factory tow package, or the # TK74FR if you do have the factory tow package. These harnesses will allow you to transfer your light signals over to a small trailer or want to add lights to a bike rack or cargo carrier for more visibility.

expert reply by: Kevin C

0

Robin H.

12/15/2025

Hey Tom, how did the etrailer hitch work out on your Highlander XSE? Did it line up with the frame rails as expected? Your update could make it easier for others with the same trim to find the right fit.

Tom C.

12/15/2025

@RobinH I ended up not buying that vehicle. Thanks, Tom

Answer 1

Hi Thomas! We definitely have hitch options for your 2021 Toyota Highlander XSE. Our site is a little confusing with how we break that out as not all will fit the XSE model, but most will actually fit whether you have it or not. So with that said,…

view full answer...

Answer 2

Hi Rafael! Our website can be a little weird with stuff like this, so I understand the confusion. We have a few hitches that will fit the XSE and a few that will not fit the XSE, but most will fit either option. When one says "exclude XSE"…

view full answer...

Answer 3

Greetings George, I understand your confusion, and I get this question a lot. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C99FR fits all models of the 2022 Toyota Highlander. So yes, it will work great for your XSE model.…

view full answer...

Answer 4

We had the chance to install the EcoHitch part #EH35VR on a similar 2022 Toyota Highlander to your 2023 model and we found that it fit well and we were able to reinstall a full size spare underneath so it would work great for you.

view full answer...

Answer 5

Yes, you can! Both the Curt item #C99FR and etrailer item #e75ZR hitches have been confirmed to fit the 2022 Toyota Highlander XSE's with dual exhaust. These hitches are essentially identical with the exception of the finish. I recommend going…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Recommended Trailer Hitch And Wiring For A 2022 Toyota Highlander XSE

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching